 |
|
 |
| MBD-H8SSL-R10-O |
- H8SSL-R10 (Standard Retail Pack)
|
| MBD-H8SSL-R10-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12.0" x 8.0" (30.5cm x 20.3cm)
|
| |
|
| CPU |
- Single 939-pin ZIF Sockets
- Supports one Dual-Core AMD Opteron™ 100 Series processor
- 1MB Cache
- 4 phase VRM
|
| Chipset |
- HyperTransport Link
- ServerWorks HT1000 I/O Hub
|
| |
|
|
| Memory Capacity |
- Four 184-pin DIMM sockets support:
- Up to 4 GB DDR 400/333 MHz memory
- Single or Dual (recommended) channel memory support
|
| Memory Type |
- DDR 400/333MHz un-buffered ECC/non-ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| SATA |
- 4 SATA Ports using ServerWorks HT1000 controller
- SATA RAID 0, 1, 10
|
| IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
|
| IPMI |
|
| Network Controllers |
- Broadcom BCM5704C Dual Gigabit Ethernet Controller
- Supports 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| SATA |
- Up to four SATA devices
- SATA RAID 0, 1, 10
|
| IDE |
- Single ATA 100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA/100
|
| Floppy |
|
| LAN |
|
| USB |
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 Header
|
|
|
|
|
|
| 1U Chassis |
* Please use air-shroud CSE-PT0112
** Please use air-shroud CSE-PT0113
(Air-shrouds sold separately)
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V) and 24-pin are required]
|
| |
|
|
| PCI-X |
- 1 64-bit 133MHz PCI-X (3.3V) slot
|
| PCI |
- 2 PCI 32-bit, 33MHz expansion slots
|
| |
|
|
| BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
- SST-49LF004B BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- ACPI 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Legacy support
- Hardware BIOS Virus Protection
- RTC (Real Time Clock) Wakeup
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog / NMI
|
| Power Configurations |
- ACPI/API Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +5V, ±12V, 2.5V Standby, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
- Supports System Management Utility
|
| FAN |
- Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
| LED |
- CPU / Overheat LED
- Suspend-state indicator LED
|
| Other Features |
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
