 | |
 | | MBD-H8DCR-i-O | - H8DCR-i (Standard Retail Pack)
| | MBD-H8DCR-i-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | |
| | CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- Single CPU configurations are not recommended
- VRM x3
| | Chipset | - nVidia nForce Pro 2200 (CK804)
- AMD 8132
| | | |
| | Memory Capacity | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | SATA | - nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 Support
| | Network Controllers | - Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers
- Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
| | IPMI | - 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
- Remote Management Module
- (Card not included)
| | Graphics | | | Super I/O | | | Clock Generator | | | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- 49LF080A BIOS Chip
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0 / 1.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
| | | | |
| | 1U Chassis | | | Important Chassis Notes | - To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required] | | | |
| | PCI-Express | | | PCI-X | - 1 64-bit 100MHz PCI-X slot
- 1 64-bit 133MHz PCI-X slot
- Note: Dual Processors are required for correct PCI-X expansion slot operation
| | | |
| | Serial ATA | - Integrated SATA 3.0Gbps Controller
- Four Serial ATA Ports
- Four SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | | | LAN | | | USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 2 Internal Headers
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 header
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V, +5V, ±12V, HyperTransport Link voltage 1.2V, memory voltage 2.5V, 3.3V Standby, VBAT
| | FAN | - Total up to 5-fan status tachometer monitoring
- Up to five 3-pin fan headers
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III