 |
|
 |
| MBD-H8DMT-IBX |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 16.4" x 6.5" (41.6cm x 16.5cm)
|
| |
|
| CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
|
| |
- Two Hyper-Transport links between the CPUs
|
| Chipset |
|
CPU-integrated NB functions, including DRAM controller and
Hyper-Transport links |
|
Note: SE processors not recommended for 1U chassis |
| |
|
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 64GB DDR2 800/667/533 MHz memory
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- For Single CPU: Memory must be populated in CPU1 DIMMS only
- Dual channel memory bus
|
| Memory Type |
- DDR2 800/667/533 MHz registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| |
|
|
| SATA |
- nVidia MCP55-Pro SATA2 3.0Gbps Controller
- 4x SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD support
|
| Network Controllers |
- Intel Zoar (82575) Dual-port Gigabit Ethernet controller with VMDq support
- Support 10/100/1000BASE-T link speeds, 2x RJ45 ports
|
| Graphics |
|
| Super I/O |
|
| |
|
| SATA |
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- 2x USB internal ports (Type A)
- Total of 6 USB 2.0 Compliant ports
|
| VGA |
|
| Serial Port |
- 2x Fast UART 16550 serial ports
(1x Header, 1x Port)
|
| InfiniBand |
- 1x External InfiniBand CX4 Connector
|
| |
|
|
| PCI-Express |
- One PCI-Express (x16) Slot
|
|
|
|
|
|
| 1U Chassis |
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +12V, +5V Standby, 1.5V, VBAT, VDD, HyperTransport Link voltage, memory voltage, Chipset voltage
- CPU switching voltage regulator
|
| FAN |
- Total of Four fan headers supporting up to 4 fans
- 4x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 4x Fan Status
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
RoHS
|
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Doctor III