 |
|
 |
| MBD-H8DMU+-O |
- H8DMU+ (Standard Retail Pack)
|
| MBD-H8DMU+-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12.1" x 13" (30.7cm x 33.2cm)
|
| |
|
| CPU |
- Dual 1207-pin Socket F
- Supports up to two Quad-Core / Dual-Core AMD Opteron™ 2000 Series (Socket F) processor(s)
|
| System Bus |
|
| Chipset |
|
| |
|
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 64 GB DDR2 667/533/400 MHz memory *
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory Type |
- DDR2 667/533/400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB **
|
| Memory Voltage |
|
| |
|
|
| SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia Host RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+) R 3.00)
- RMM (Remote Management Module)
- (Card not included)
- For dedicated LAN, CBL-0177L must be used on left full-size slot. (Cable not included)
|
| Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI ES1000 Graphics Controller
|
| Super I/O |
|
| |
|
|
| SATA |
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy |
- 1 Floppy port; 1.44 MB support
|
| LAN |
|
| USB |
- FUCI
- Up to 6 USB Ports 2.0 Compliant
- 2 Rear Ports
- 4 Internal Headers
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
| Others |
|
| |
|
|
| PCI-Express |
- 1U Left Side:
1 (x8) PCI-Express & UIO Slots
- 2U Left Side:
3 (x8) PCI-Express & UIO Slots
- 2U Right Side:
1 (x8) PCI-Express &
1 (x4) PCI-Express Slots
|
| IPMI |
|
|
|
|
|
|
| 1U Chassis |
* Please use air-shroud
MCP-310-00026-01
(Air-shrouds sold separately)
|
| 2U Chassis |
* Please use air-shroud
MCP-310-00025-01
(Air-shrouds sold separately)
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 20-pin are required]
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
|
| Power Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
| FAN |
- Total up to 8-fan status tachometer monitoring
- Up to two 4-pin and six 3-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
RoHS
|
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
