 |
 |
MBD-H8SML-7 |
- H8SML-7 (Standard Retail Pack)
|
|
 |
Form Factor |
|
Dimensions |
- 9.6" x 9.6 " (24.4cm x 24.4cm)
|
|
 |
CPU |
- Single 942-pin Socket AM3+
- Supports up to Single 8/4-Core ready AMD Opteron 3000 Series processor
- HT3.0 Link support
|
Chipset |
- AMD chipset SR5650 / SP5100
|
|
 |
Memory Capacity |
|
Memory Type |
- DDR3 1600/1333/1066MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
 |
SATA |
|
SAS |
- LSI 2308 SW 8-port SAS2 controller
- RAID 0, 1, 10
|
Network Controllers |
- Intel 82574L single-port Gigabit Ethernet, 10/100/1000Base-T support
|
VGA |
- Matrox G200eW 16MB DDR2 graphics
|
Super I/O |
|
|
 |
SATA |
|
SAS |
|
USB |
- 7x USB 2.0 ports (2x rear / 2x header - 4 ports / 1x type A)
|
VGA |
|
Serial Ports |
- 2 Fast UART 16550 serial ports
- 1 header & 1 port
|
|
 |
 |
 |
1U Chassis |
|
|
 |
PCI-Express |
- 1 PCI-E 2.0 x8 (in x16 slot)
- 1 PCI-E 2.0 x4 (in x8 slot)
|
|
 |
BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
 |
Software |
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
|
|
 |
CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
FAN |
- Up to 5-fan status tachometer monitoring
- Up to five 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
 |
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
 |
FCC |
- Passed to meet FCC standard requirement
|
|