 |
 |
MBD-H8DCL-iF |
- H8DCL-iF (Standard Retail Pack)
|
|
 |
Form Factor |
|
Dimensions |
|
|
 |
CPU |
- Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron 4000 Series processors
- HT3.0 Link support
|
Chipset |
- AMD chipset SR5690 + SP5100
|
|
 |
Memory Capacity |
- 8 DIMM sockets
- Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type |
- Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
|
Memory Voltage |
|
|
 |
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- 2 Intel® 82574L single-port Gigabit Ethernet Controllers
- 10/100/1000BASE-T support
|
VGA |
|
Super I/O |
|
|
 |
SATA |
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB |
- 7x USB 2.0 ports
- 2 rear, 1 Type-A, 2 headers for 4 ports
|
VGA |
|
Serial Ports |
- 2x Fast UART 16550 serial port (one header & one port)
|
Power |
- SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V
Note: Two 8-pin connectors are required to support 2 CPUs due to SSI spec
|
Others |
- 1 SATA DOM power connector, TPM header
|
|
 |
PCI-E |
- 1 PCI-E 2.0 x8 (in x16 slot)
- 3 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI
|
|
 |
 |
 |
3U/Mid Tower |
|
Tower/4U Rackmount |
|
- Recommendation:
- 1. Strongly suggest using Supermicro recommended chassis
- 2. Active Heatsink SNK-P0048AP4 plus BKT-0048L is recommend used on tower and 4U chassis
|
|
 |
BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
 |
Software |
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
|
|
 |
CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
FAN |
- Up to 6-fan status tachometer monitoring
- Up to 6x 4-pin fan headers
- Status monitor for speed control
- 4-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
 |
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
 |
FCC |
- Passed to meet FCC standard requirement
|
|