 |
|
 |
| MBD-H8DGT-HLIBQF |
- H8DGT-HLIBQF (Standard Retail Pack)
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 6.8" x 16.64" (17.2cm x 42.3cm)
|
| |
|
| CPU |
- Dual 1944-pin Socket G34
- Supports up to two 16/12/8-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5690 + SP5100
|
| |
|
|
| Memory Capacity |
- Eight DIMM sockets
- Support up to 128GB DDR3 1600/1333/1066 MHz
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
-
See Detailed Memory Support Matrix
|
| Memory Type |
- DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| Infiniband |
- Mellanox Connect-X2 QDR Infiniband 40Gbps Controller
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
| |
|
|
| SATA |
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 5x USB 2.0 ports
- 2x Rear, 1x header (2x ports), and 1x Type A
|
| VGA |
|
| Serial Ports |
- 2x Fast UART 16550 serial port (one header & one port)
|
| |
|
|
| PCI-E |
- 1x PCI-E 2.0 x16, 1x PCI-E 2.0 x8 in x4 (for SAS adapter card support)
|
|
|
|
|
|
| 2U Twin & 2U Twin^2 |
|
| 2U Chassis |
|
| |
|
|
| BIOS Type |
- 16Mb/32Mb SPI Flash EEPROM with AMI®
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Main switch override mechanism
- Keyboard Wakeup from soft-off
- CPU fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 2-fan status tachometer monitoring
- Up to four 4-pin fan headers
- Status monitor for speed, on/off control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
| LEDs |
- CPU / System Overheat
- Suspend state indicator
- +5V Standby Alert
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill support
|
| |
|
RoHS
|
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
Doctor III