 | |
 | | MBD-H8QM3-2+ -O | - H8QM3-2+ (Standard Retail Pack)
| | MBD-H8QM3-2+ -B | | | | |
| | Form Factor | | | Dimensions | - 16.4" x 13" (41.7cm x 33.0cm)
| | | | | CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core / Quad-Core / Dual-Core AMD Opteron™ 8000 Series processors
- HT3.0 Link support ^
| | Chipset | - nVidia MCP55 Pro
- NEC uPD720400
| | | |
| | Memory Capacity | - 32x 240-pin DIMM sockets support up to 256GB DDR2 800/667/533 MHz memory *
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR2 800/667/533MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
| | SAS | | | IPMI | | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Super I/O | | | VGA | - ATI ES1000 Graphics Controller
16MB Graphics & VGA port | | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST 49LF080A BIOS Chip
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0/1.0
- USB Keyboard Support
- SMBIOS 2.3
| | | |
| | PCI-Express | | | | | |
| | Important Chassis Notes | - To ensure system stability, a 1000W (minimum) ATX power supply
[ 8-pin & 8-pin (+12V) and 24-pin are required] | | | |
| | SAS | | | | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100 / 133
| | Floppy | - 1 Floppy port; 1.44 MB support
| | LAN | | | USB | - Up to 4 USB Ports 2.0/1.1 Compliant
- 2 Rear Ports
- 2 Internal Headers
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 Header
| | VGA | | | Others | - 1 SATA DOM power connector
| | | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III - Watch Dog
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT.
- CPU switching voltage regulator
| | FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- PC Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
