H8QME-2
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8QME-2 ]
H8QME-2
Key Features
1. Four Six-Core / Quad-Core / Dual-Core
    AMD Opteron™ 8000 Series (Socket F)
    support; HT3.0 Link support ^
2. nVidia MCP55 Pro / AMD 8132 Chipsets
3. Up to 128GB DDR2-800/667/533
    SDRAM
4. Intel 82546GB Dual-port Gigabit
    LAN/Ethernet Controller
5. 6 SATA2 3.0Gbps Ports
6. 1 (x16)*, 1 (x8) PCI-e,
    2 64-bit 133/100MHz PCI-X,
    2 64-bit 100MHz PCI-X,
    2 HyperTransport (HTX)
7. SIMSO IPMI 2.0 Support
8. 9 Fan Support with Speed Control

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities

RoHS 5/6    

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-H8QME-2-O
  • H8QME-2 (Standard Retail Pack)
MBD-H8QME-2-B
  • H8QME-2 (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 16" x 13" (40.6cm x 33.2cm)
 
Processor/Chipset
CPU
  • Quad 1207-pin Socket F
  • Supports up to four Six-Core / Quad-Core / Dual-Core AMD Opteron™ 8000 Series processors
  • HT3.0 Link support ^
Chipset
  • nVidia MCP55 Pro
  • AMD 8132
 
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Supports up to 128 GB DDR2 800/667/533 MHz memory
  • Single or Dual (recommended) channel memory support
  • For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR2 800/667/533MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • nVidia MCP55 Pro SATA2 3.0Gbps Controller
  • 6 SATA2 Ports
  • nVidia RAID 2.0
  • SATA RAID 0, 1, 0+1, 5, JBOD Support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMSO)
  • (Optional: AOC-SIMSO R 3.00)
  • NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
  • RMM (Remote Management Module)
  • (Card not included)
  • For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Super I/O
  • Winbond 83627HF
VGA
  • ATI ES1000 Graphics Controller
    16MB Graphics & VGA port
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST 49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 
Expansion Slots
PCI-Express
  • 1 x16 PCI-e Slot*
  • 1 x8 PCI-e Slot
PCI-X
  • 2 64-bit 133/100MHz PCI-X (3.3V) slots
  • 2 64-bit 100MHz PCI-X (3.3V) slot
HyperTransport
  • 2 HyperTransport (HTX) Connectors
Chassis ( Optimized for H8QME-2 )
Important Chassis Notes
  • To ensure system stability, a 1000W (minimum) ATX power supply
    [ 8-pin & 8-pin (+12V) and 24-pin are required]
 
Input / Output
SATA
  • 6 SATA2 ports
IDE
  • Single EIDE channel support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100/133
Floppy
  • 1 Floppy port; 1.44 MB support
LAN
  • 2 RJ45 LAN ports
USB
  • FUCI
  • Up to 4 USB Ports 2.0 Compliant
  • 2 Rear Ports
  • 2 Internal Headers
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 Header
Parallel Port
  • 1 ECP / EPP parallel port
VGA
  • 1 VGA port
Others
  • 1 SATA DOM power connector
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  • CPU switching voltage regulator
FAN
  • Total up to 9-fan status tachometer monitoring
  • Up to nine 3-pin fan headers
  • Status monitor for speed control
  • Support 3-pin fans with fan-speed control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • PC Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

RoHS 5/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8QME-2 MBD-H8QME-2 -O 1 H8QME-2 Motherboard
Retention BKT-0012L 4 RETENTION MODULE FOR AMD CPU SOCKET F,ROHS
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 3 CBL-022L 1 ATX FLOPPY CABLE 3 HEADERS PB FREE
I/O Cable 4 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
I/O Shield CSE-PT7L 1 I/O SHIELD FOR DUAL LAN MOTHERBOARD, PB FREE

* Cannot populated with PCI-E x16 VGA cards
^ HT Link speed supporting depends on AMD Opteron processor spec.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 8000, Opteron, SocketF, Socket F