 | |
 | | MBD-H8QI6+-F-O | - H8QI6+-F (Standard Retail Pack)
| | MBD-H8QI6+-F-B | | | | |
| | Form Factor | | | Dimensions | - 16.4" x 13" (41.7cm x 33.0cm)
| | | | | CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core / Quad-Core AMD Opteron™ 8000 Series processors**
- HT3.0 Link support
| | Chipset | - AMD SR5690 + SP5100 Chipset
| | | |
| | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Support up to 128GB memory
- Dual channel memory bus; Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | | | | |
| | SATA | - AMD SP5100 (RAID 0, 1, 10)
| | SAS | - LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY
RAID 5 support | | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| | Network Controllers | - Intel® 82576 controller, Dual-Port
Gigabit Ethernet - 10/100/1000BASE-T support
| | VGA | - Matrox G200eW 16MB DDR2 graphics
| | Super I/O | | | | |
| | SATA | | | SAS | - Integrated LSI 2008 SAS2 Controller
- Eight Serial Attached SCSI (SAS) ports
- 8x 6Gbps SAS / SATA ports
| | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
| | USB | - 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
| | Others | - 1 SATA DOM power connector
| | | |
| | PCI-Express | | | | | | |
| | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
| | | |
| | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| | FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III