 | |
 | | AS-1020P-8 |
- A+ Server 1020P-8 (Beige)
|
| AS-1020P-8B |
- A+ Server 1020P-8B (Black)
|
| |
| | CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron 200 Series processor(s)
- 1MB Cache
- VRM x3
|
| Chipset |
- ServerWorks HT2000
- ServerWorks HT1000
|
| | |
| | Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 32 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in the adjacent memory bank
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
|
| SCSI |
- Adaptec AIC-7902W Controller
- Dual-Channel Ultra320 SCSI with Host RAID
- Host RAID 0, 1, 10, JBOD
|
| Zero Channel RAID |
- Support for Zero-Channel RAID
|
| IPMI |
|
| Network Controllers |
- ServerWorks® HT2000 Dual Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
|
| Super I/O |
|
| Clock Generator |
|
| | |
| | Left Universal Slot |
- 1 (x8) PCI-E slot
(Optional with Riser Card) OR
- 1x 64-bit PCI-X 133MHz slot
- Accommodates Full-height (maximum 11" length) add-on cards
|
| Right Universal Slot |
- 1 (x8) PCI-E slot
(Optional with Riser Card) OR
- 1x 64-bit PCI-X 100MHz slot
- Low-profile slot
|
| IPMI |
|
| | |
| | SCSI |
- 2-Channel Ultra320 SCSI
- AIC7902 SCSI Controller
- SCSI ZCR Support
|
|
| Floppy |
|
| LAN |
|
| USB |
- FUCI
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 Header
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- UID LED
|
| Ports |
|
| | |
| | Hot-swap |
- 4 x 3.5" Hot-swap Ultra320 SCSI drive bays
|
| | |
| | Floppy |
|
| DVD-ROM |
|
| | |
| | 4-port SCSI Backplane with SAF-TE |
| | |
| | Fans |
- 4x 15000 RPM Nidec Dual Blade Fans
|
| | |
| | 700W AC-DC power supply and power distributor w/ PFC |
| AC Input |
- 100 - 240V, 60-50Hz, 10 - 4 Amp
|
| +5V standby |
|
| +12V |
|
| With Power Distributor |
- +5V: 24 Amp
- +3.3V: 21 Amp
- -12V: 0.6 Amp
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +5V, ±12V, +5V Standby, +2.5V Standby, VBAT.
- Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V
- Up to 10 fan status
- Supports System Management Utility
|
| FAN |
- Total of up to 5 proprietary fan headers
- 10 Tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low-noise Fan Speed Control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- PC temperature sensing logic
|
| LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| | BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- ACPI 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
|
|
