A+ Server 1022G-NTF
  A+ Products  Systems   1U   [ 1022G-NTF ]








Integrated Board
H8DGU-F


Key Features

1. Dual AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 512GB DDR3 1600MHz ECC

    Registered DIMM; 16x DIMM sockets
3. 2x PCI-e Gen 2.0 x8 slots
4. Dual-port GbE LAN Controller, 4x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI 2.0)
5. 4x Hot-swap SATA Drive Bays
6. 560W High-efficiency Power Supply

    80 PLUS, Gold Level Certified


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-1022G-NTF
  • A+ Server 1022G-NTF (Black)
 
Motherboard
Super H8DGU-F
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
 
  • 3.2GHz Hyper-Transport (HT3) link
Chipset
  • AMD chipset SR5670 / SP5100
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W)
 
System Memory
Memory Capacity
  • 16 DIMM sockets
  • Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16 DIMMs
  • Quad channel memory bus
  • For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port

      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond 83527 chip
 
Expansion Slots
1U
  • 2x PCI-e 2.0 x8 slots
 
Input / Output
SATA
  • 4x SATA2.0 (3Gb/s) Ports
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 4x header, 1x Type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Others
  • 1 UID
 
System BIOS
BIOS Type
  • 16Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 36 lbs (16.4kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • (UID LED)
 
Drive Bays
Hot-swap
  • 4x 3.5" SATA Hot-swap drive trays
  • Enterprise SATA HDD only recommended
 
Peripheral Drives
DVD-ROM
  • Slim DVD-ROM drive
 
SAS / SATA Backplane
1x 1U SAS / SATA backplane
System Cooling
Fans
  • 4x 4cm Counter-rotating PWM fans
 
Power Supply
560W AC power supply w/ PFC (24-pin)
AC Voltage
  • 100-240 V, 50-60 Hz, 7.5 Amp max
+5V
  • 18 Amp
+5V standby
  • 3 Amp
+12V
  • 46 Amp @ 100-180V;

     49 Amp @ 180-240V
-12V
  • 0.5 Amp
+3.3V
  • 15 Amp
Certification Gold Level Certified   Gold Certified
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
FAN
  • Total up to 8-fan status tachometer monitoring
  • Status monitor for speed control
  • Stauts monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
  • UID/Remote LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DGU-F 1 Super H8DGU-F Motherboard
Chassis CSE-815TQ-563UB 1 1U Chassis
Adapter 1 CDM-USATA-G 1 mini-SATA to USB adapter for slim DVD
Cable 1 CBL-0157L 1 CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,40CM,28AWG
Cable 2 CBL-0341L 1 USB 2.0,INT,LCD,DVD,1X4/P2.54 TO 2X5/P2.54,70CM,28/24AWG
Cable 3 CBL-0190L 1 SATA,INT,ROUND,SET OF ST-ST 4,43/33/26/22CM,26AWG
Cable 4 CBL-0210L 1 FDD, DVD, 4 pin power adapter cable, 8cm. 24AWG
Heatsink / Retention SNK-P0042P 2 1U Passive CPU HS for AMD Socket G34
Peripheral Drive DVM-TEAC-DVD-SBT4 1 (EOL) BLACK TEAC SLIM DVD ROM SATA DRIVE,HF,RoHS/REACH
Riser Card RSC-R1UU-2E8 1 RISER CARD RSC-R1UU-2E8


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Fan(s) FAN-0086L4 - 1U, 4-pin Counter-rotating PWM Fan
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.