A+ Server 1122G-URF4+

  A+ Products  Systems  1U   [ 1122G-URF4+ ]

AS-1122G-URF4+







Integrated Board
Supermicro AMD Solutions Aplus Motherboard MBD-H8DGU-LNF
H8DGU-LN4F+


Key Features

1. Dual AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 768GB DDR3 Registered ECC

    1600/1333/1066 in 24 DIMMs
3. 1x UIO, 1x PCI-E 2.0 x16
4. 2x Intel 82576 (Dual-port Gb LAN)

    (4 ports)
5. 8x Hot-swap SAS/SATA Drive Bays
6. Integrated IPMI 2.0 with Dedicated LAN
7. 700W Gold Level Redundant

    High-efficiency Power Supply


Available Colors: Black    
Note: SAS Add-on card is optional / SAS cable included


 BIOS
 IPMI
 


Product SKUs
AS-1122G-URF4+
  • A+ Server 1122G-URF4+ (Black)
 
Motherboard
Super H8DGU-LN4F+
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5690 / SP5100
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W)
 
System Memory
Memory Capacity
  • 24 DIMM sockets
  • Support up to 768GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 24 DIMMs
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2x Intel® 82576 controller, Quad-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond 83527HG chip
  • Winbond WPCM450 (BMC)
 
Expansion Slots
PCI-Express
  • 1x PCI-E x16 (Gen 2.0); 1x UIO
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports -> (Addition SATA cable required, please check Optional Parts List as below)
LAN
  • 4x RJ45 ports and 1x RJ45 Dedicated LAN supports IPMI
USB
  • 5x USB 2.0 ports
  • 2x Rear, 2x header, 1x Type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 serial port header
Others
  • 1 UID
 
System BIOS
BIOS Type
  • 16Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 26.6" (676mm)
Gross Weight 46 lbs (19.45 kg)
Available Color Black
 
Front Panel
Buttons
  • Power On/Off Button
  • System Reset Button
LEDs
  • Power status
  • Hard drive activity
  • 2x Network activity
  • Overheat status
  • Powerfail
 
Drive Bays
Hot-swap 8x 2.5" SAS / SATA Hot-swap drive bays

SAS or enterprise SATA HDD only recommended
 
Peripheral Drives
DVD-ROM Slim DVD-ROM drive ( optional )
 
SAS Backplane
1x 1U SAS backplane w/ Enclosure Management
System Cooling
Fans 5x 40x56mm 4-pin PWM Fans

1x fans for AOC cooling (optional)
 
Power Supply
700W Redundant AC-DC high-efficiency power supply with PMBus and I2C
AC Voltage
  • 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp
DC Output +5V standby
  • 3 Amp
DC Output +12V
  • 700W: 58 Amp @ 100-140V
With Power Distributor
  • +5V: 25 Amp
  • +3.3V: 12 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified   Gold Certified
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
FAN
  • Total up to 8-fan status tachometer monitoring
  • Status monitor for speed control
  • Stauts monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
  • UID/Remote LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DGU-LN4F+ 1 Super H8DGU-LN4F+ Motherboard
Chassis CSE-119TQ-R700UB 1 1U Chassis
Air Shroud MCP-310-19003-0N 1 SC819/119 Intel DP X9, X8 Mylar air shroud, 12.8x16.5MB
Cable 1 CBL-0388L-01 2 MINI SAS-4 SATA (RA),INT,75/75/90/90CM,75CM SB,30AWG
Heatsink / Retention SNK-P0042P 2 1U Passive CPU HS for AMD Socket G34
Riser Card RSC-R1UU-UE16 1 RSC-R1UU-UE16


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Add-on Card AOC-USAS2-L8IR - 6Gb/s Eight-Port SAS Internal RAID Adapter
RAID Adapter AOC-S2208L-H8IR - 2128 based SAS/SATA RAID- 8 internal ports/Low profile-PCI-E
Cable(s) CBL-0157L-01 - 8pin to 8pin cable for SGPIO, 61.5cm, PBF
Cable(s) CBL-0388L-01 - -
LSI Accessory BTR-0018L-0000-LSI - LSI00161 IBBU07 BATTERY BACKUP FOR SAS2108
LSI Accessory BTR-0018L-KIT - LSI iBBU07 extension kit (To Installed at 2.5" HDD Location)
Riser Card RSC-R1UU-2E8 - RISER CARD RSC-R1UU-2E8
RAID Adapter AOC-SAS2LP-H8IR - 2108 based SAS/SATA RAID- 8 internal ports/Low profile-PCI-E
Cable(s) CBL-0462L - Battery cable for iBBU09 to 1 row DF14 header, 68cm. 28AWG
Cable(s) CBL-0044L - SATA CABLE 61CM FLAT S-S PBF.26AWG flat
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.