A+ Server 2122TC-DL6RF4

  A+ Products  Systems  2U   [ 2122TC-DL6RF4 ]









Integrated Board
H8DCT-HLN4F


Key Features (per node)

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD Opteron™ 4000 series

    processors (Socket C32)

    8/6/4-Core ready; HT3.0 Link support
2. Up to 192GB DDR3 1600MHz ECC

    Registered DIMM; 12x DIMM sockets
3. 2 (x8) PCI-E 2.0 (in x16, low-profile)
4. Intel® I350 (Powerville) Quad

    Gigabit Ethernet LAN controller
5. 12x 2.5" Hot-swap SAS2/SATA/SSD

    HDDs (24 total)
6. LSI 6Gbps SAS 2008 IT Mode
7. 1280W High-Efficiency Platinum Level

    Redundant Power Supplies (94%

    Efficiency)
8. IPMI 2.0 with dedicated LAN


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-2122TC-DL6RF4
  • A+ Server 2122TC-DL6RF4
 
Motherboard
Super H8DCT-HLN4F
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket C32
  • Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5670 + SP5100
Note
  • Supports 4000 series processors with Max ACP 75W (TDP 95W)
 
System Memory (per node)
Memory Capacity
  • 12 DIMM sockets
  • Support up to 192GB Registered ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
  • Dual channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices (Per Node)
SATA
  • AMD SP5100 (RAID 0, 1, 10)
SAS
  • LSI 6Gbps SAS 2008 IT Mode
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® I350 Quad Gigabit Ethernet LAN controller
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots (per node)
PCI-E
  • 1x PCI-E 2.0 x16, 1x PCI-E 2.0 x8 in x4 (for SAS adapter card support)
 
Input / Output (per node)
SATA
  • 6x SATA (3Gb/s) ports
SAS
  • Integrated LSI 2008 IT Mode SAS2 RAID Controller
LAN
  • 4 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 4x USB 2.0 ports
  • 2x Rear, 1x header (2 ports)
VGA
  • 1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
 
System BIOS (per node)
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 2U Twin Rackmount
Model
  • CSE-217HD-R1K28BP
 
Dimensions (stand-alone chassis / package)
Height
  • 3.5" (89mm)
Width
  • 17.25" (438mm)
Depth
  • 28.5" (724mm)
Gross Weight
  • 85 lbs / 38.6 kg
Available Colors
  • Black
 
Front Panel
Buttons
  • 4x Power On/Off button
  • 4x UID button
LEDs
  • 4x Power status LED
  • 4x UID LED
  • 4x Network activity LEDs
  • 4x System overheat / fan failed /

     power failed LED
 
Drive Bays
HDD Bay
  • 24x Hot-swap 2.5" HDD

    (12 for each node)
 
System Cooling
Fans
  • 4x 80mm PWM cooling fans
 
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+

  Platinum Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DCT-HLN4F 2 Super H8DCT-HLN4F Motherboard
Chassis CSE-217HD-R1K28B 1 2U Chassis
Air Shroud MCP-310-82720-0B 1 2U twin air shroud for MH8DCT-HLN4F
Backplane BPN-ADP-E16-L 2 2U adapter card; LSI 2008 + expander providing 12x SAS2 ports
Cable 1 CBL-0218L 1 USB/KVM/SUVI,36 PIN TO 9 PIN/15 PIN/2 USB CH,11.5CM,30/28AWG
CD CDR-APLUS2 1 DRIVER CD FOR AMD SP5100 CHIPSET MB
Heatsink / Retention SNK-P0038PS 4 2U+ PASSIVE CPU HS FOR INTEL 2U TWIN SERVERS
Riser Card RSC-R2UT-2E8R 2 RSC-R2UT-2E8R


Optional Parts List
  Part Number Qty Description
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.