 | |
 | | AS-4021GA-62R+F |
- A+ Server 4021GA-62R+F (Black)
|
| |
| | CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core AMD Opteron 2000 Series processors**
- HT3.0 Link support
|
| Chipset |
- Dual AMD chipset SR5690 + SP5100
|
| | |
| | Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz memory
- Dual channel memory bus
- Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR2 800/667/533 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| | |
| | SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| SAS |
- LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY
RAID 5 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
| | |
| | SATA |
|
| SAS |
- Integrated LSI 2008 SAS2 controller support up to 8 SAS / SATA drives
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x serial port header
|
| | |
| | PCI-Express |
- 4x PCI-e 2.0 x16
- 2x PCI-e 2.0 x4 (in x8 slot)
|
| PCI |
|
| | |
| | BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
| |
| | Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00001-00)
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- LED Power On/Off button
- System Reset button
|
| LEDs |
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| | |
| | Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Bays
|
| Peripheral Bay(s) |
- 3x 5.25" drive bays in storage module -
rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| | |
| | SAS / SATA Hard Drive Backplane with SES2 |
| | |
| | Fans |
- 2x 5000 RPM Hot-swap Cooling Fans
- 1x 5000 RPM Hot-swap Rear Exhaust Fan
|
| |
| | 1400W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input |
- 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
|
| DC Output |
- 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
Gold Certified
[ Test Report ]
|
| | |
| | Software |
|
| Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin Pulse Width Modulated
(PWM) fan connectors
- Status monitor for speed control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Doctor III
