H8DME-2
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8DME-2 ]
H8DME-2
Key Features
1. Two Six-Core / Quad-Core / Dual-Core
    AMD Opteron™ 2000 Series (Socket F)
    support; HT3.0 Link support ^
2. nVidia® MCP55 Pro Chipset,
    NEC uPD720400
3. Up to 128GB DDR2 800/667/533
    SDRAM; 16 DIMM Sockets
4. Dual-port Gigabit
    LAN/Ethernet Controller
5. 6 SATA2 3.0Gb/s HDD Support
6. 2 x8 PCI-e,
    2 64-bit 133/100MHz PCI-X,
    2 64-bit 100MHz PCI-X
7. ATI ES1000 Graphics
8. 8 Fan Support with Speed Control

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities

RoHS 5/6    

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-H8DME-2-O
  • H8DME-2 (Standard Retail Pack)
MBD-H8DME-2-B
  • H8DME-2 (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13.05" (30.5cm x 33.2cm)
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket F
  • Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
  • HT3.0 Link support ^
 
  • Two Hyper-Transport links between the CPUs
Chipset
  • nVidia MCP55 Pro
  • NEC uPD720400
 
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Support up to 128GB DDR2 800/667/533 MHz memory *
  • For Single CPU: Memory must be populated in CPU1 DIMMs only
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • Dual channel memory bus
Memory Type
  • DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
SATA
  • nVidia MCP55 Pro SATA2 3.0Gbps Controller
  • 6 SATA Ports
  • nVidia RAID 2.0
  • SATA RAID 0, 1, 0+1, 5, JBOD Support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot
  • (Optional: AOC-SIM1U(+)  R 3.00) **
  • RMM (Remote Management Module)
  • (Card not included)
Network Controllers
  • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI ES1000 Graphics Controller
    16MB Graphics & VGA port
Super I/O
  • Winbond 83627HF
 
Input / Output
SATA
  • 6 SATA2 ports
IDE
  • Single EIDE channel support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100/133
Floppy
  • 1 Floppy port; 1.44 MB support
LAN
  • 2 RJ45 LAN ports
USB
  • FUCI
  • Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
  • 2 Rear Ports
  • 4 Internal Headers
VGA
  • 1 VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 serial port header
Others
  • 1 SATA DOM power connector
 
Expansion Slots
PCI-Express
  • 2 x8 PCI-e slots
  • 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
PCI-X
  • 2 64-bit 133/100MHz PCI-X (3.3V) slots
  • 2 64-bit 100MHz PCI-X (3.3V) slot
IPMI
  • IPMI 2.0 expansion slot
Chassis ( Optimized for H8DME-2 )
Important Chassis Notes
  • To ensure system stability, a 550W (minimum) ATX power supply
    [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to six 3-pin & two 4-pin fan headers
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

RoHS 5/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8DME-2 MBD-H8DME-2 -O 1 H8DME-2 Motherboard
Retention BKT-0012L 2 RETENTION MODULE FOR AMD CPU SOCKET F,ROHS
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 3 CBL-022L 1 ATX FLOPPY CABLE 3 HEADERS PB FREE
I/O Cable 4 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
I/O Shield CSE-PT7L 1 I/O SHIELD FOR DUAL LAN MOTHERBOARD, PB FREE

  * Fully populated DDR2 667 or 800 will be downgraded to DDR2 533
** It is recommended to use dedicated LAN for KVM-over-LAN with fast speed needed.
 ^ HT Link speed supporting depends on AMD Opteron processor spec.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 2000, Opteron, SocketF, Socket F