H8DCL-iF

Supermicro, Inc.

   

  A+ Products   Motherboards   [ H8DCL-iF ]



Key Features
1. Dual AMD Opteron™ 4000 series
    processors (Socket C32)
    8/6/4-Core ready; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 256GB DDR3 1600MHz ECC
    Registered DIMM; 8x DIMM sockets
4. Dual Intel® 82574 Gigabit Ethernet
    Controller
5. 6x SATA (3.0 Gb/s) ports via
    AMD SP5100 controller, RAID 0, 1, 10
6. Expansion slot:
    1 PCI-E 2.0 x8 (in x16 slot)
    3 PCI-E 2.0 x8
    1 PCI-E 2.0 x4 (in x8 slot)
    1 PCI
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated
    LAN

 
Links & Resources
Tested Memory List
Tested HDD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
OS Compatibility

   

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-H8DCL-iF
  • H8DCL-iF (Standard Retail Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10"
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket C32
  • Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5690 + SP5100
 
System Memory
Memory Capacity
  • 8 DIMM sockets
  • Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
  • Dual channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2 Intel® 82574L single-port Gigabit Ethernet Controllers
  • 10/100/1000BASE-T support
VGA
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Input / Output
SATA
  • 6x SATA (3Gb/s) ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2 rear, 1 Type-A, 2 headers for 4 ports
VGA
  • 1x VGA port
Serial Ports
  • 2x Fast UART 16550 serial port (one header & one port)
Power
  • SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V

  • Note: Two 8-pin connectors are required to support 2 CPUs due to SSI spec
Others
  • 1 SATA DOM power connector, TPM header
 
Expansion Slots
PCI-E
  • 1 PCI-E 2.0 x8 (in x16 slot)
  • 3 PCI-E 2.0 x8
  • 1 PCI-E 2.0 x4 (in x8 slot)
  • 1 PCI
Chassis (Optimized for H8DCL-iF )
3U/Mid Tower
Tower/4U Rackmount
  • Recommendation:
  • 1. Strongly suggest using Supermicro recommended chassis
  • 2. Active Heatsink SNK-P0048AP4 plus BKT-0048L is recommend used on tower and 4U chassis
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 6-fan status tachometer monitoring
  • Up to 6x 4-pin fan headers
  • Status monitor for speed control
  • 4-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8DCL-iF MBD-H8DCL-iF -O 1 H8DCL-iF Motherboard
Retention BKT-0012L 2 RETENTION MODULE FOR AMD CPU SOCKET F,ROHS
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-0083L 1 15.7" USB 2.0 2-PORT W/KEY
I/O Cable 3 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 4 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 2000, Opteron, SocketF, Socket F