About Us Products Support News Where To Buy
About Us Company Milestones Investor Relations Careers Contact Policies
SuperServer® SuperBlade® Motherboards Chassis Accessories configurator AMD Solutions
Support Downloads Online Support Product Manuals RMA archive
Newsroom Events & Conferences News Press Releases
Asia / Middle East Pan Europe North America Central America South America Other Regions GSA
 
 
A+ Server 1022GG-TF
Supermicro, Inc.

   
  A+ Products   Systems   1U   [ 1022GG-TF ]




Integrated Board
H8DGG-QF

Key Features
1. Dual AMD Opteron™ 6000 series
    (6300P* ready) processors (Socket G34)
    16/12/8/4-Core ready; HT3.0 Link
    support
2. 2x double width GPU cards supported,
    optimized for GPU solution (GPU cards
    not included)
3. Up to 512GB DDR3 Registered ECC
    1600/1333/1066 SDRAM in 16 DIMMs
4. 2x full height full length PCI-e Gen 2.0
    x16 slots; 1x low-profile PCI-e x8
    Gen 2.0 in x16 slot (accommodates
    AOCs up to 5.9" in length)
5. Dual-port GbE LAN Controller, 4x
    USB 2.0 ports, 1x dedicated LAN for
    system management (IPMI2.0)
6. 3x Hot-swap SATA Drive Bays
7. 1400W High-efficiency Power Supply
    Gold Certified
8. 1x Low-profile PCI-E 2.0 in x16 slot
    (For add-on card up to 5.9"in length)

Available Colors: Black    

 BIOS
 IPMI
 

Product SKUs
AS-1022GG-TF
  • A+ Server 1022GG-TF (Black)
 
Motherboard
Super H8DGG-QF
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • Dual AMD chipset SR5690 + SP5100
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W) at 30°C
 
System Memory
Memory Capacity
  • Sixteen DIMM sockets
  • Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs*
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port
      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots
1U
  • 2/1 PCI-E 2.0 x16/x8 in x16 (2 GPU)
 
Input / Output
SATA
  • 3x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 4x USB 2.0 ports
  • 2x Rear and 2x header
VGA
  • 1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 28.2" (716mm)
Gross Weight
  • 38 lbs (17.2 kg)
Available Color
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
 
Drive Bays
Hot-swap
  • 3x 3.5" Hot-swap SATA drive bays
  • Enterprise SATA HDD only recommended
 
Peripheral Drives
DVD-ROM
  • Slim DVD-ROM drive (optional)
 
Backplane
SATA HDD Backplane
System Cooling
Fans
  • 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
 
Power Supply
1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
  • 4 Amp
DC Output
+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
Certification Gold Certified
  Gold Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       5°C to 30°C (41°F to 86°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
See Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
AMD, AMD System, AMD Server, AMD Opteron, Opteron 1000, Opteron, Socket AM2