 | |
|
| |
| |
| | |
Key Features
1. 700W Power Supply 2. 8 x 3.5" SAS/SATA Hot-swappable
Drive Bays 3. 3x 5.25" Peripheral Drive Bays
(One with Floppy Drive Bezel) 4. 7x Full-height, Full-length
expansion slot 5. 3x Hot-Swappable Cooling Fans 6. 2x 5000 RPM Hot-Swappable
Rear-Exhaust Fans 7. 2x Front USB Ports 8. Locking Bezel with Filter 9. Power Switch, Reset Switch &
6 LED Indicators 10. Full SES2 support is available with SAS motherboards and other compatible components.
| | | | Downloads | | | | |  | |
| | | | | |
 | | CSE-745TQ-700 | - SuperChassis 745TQ-700 (Beige)
| | CSE-745TQ-700B | - SuperChassis 745TQ-700B (Black)
| | | |
| | Tower / 4U chassis support for max. motherboard size - 13.68" x 13" (34.7cm x 33cm) | | | |
| | Dual Xeon® 1066/800 MHz FSB Processors | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | 7x PCI expansion slots | | | |
| | Hot-swap | - 8x 3.5" Hot-swap SAS/SATA Drive Bays
- SAS or enterprise SATA HDD only recommended
| | Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
| | | |
| | SAS / SATA Hard Drive Backplane | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
| | Ports | | | |
Exception caught! The key [prodID] does not exist.
| |
| | Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
| | | |
| | Chassis intrusion switch | | | | |
| | Operating Temperature Range | | | Non-Operating Temperature Range | - -40°C ~ 60°C (-40°F ~ 140°F)
| | Operating Relative Humidity Range | - 8% ~ 90% (non-condensing)
| | Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
| | | |
| | 700W AC-DC power supply and power distributor w/ PFC | | AC Input | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| | +5V standby | | | +12V | | | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | | |
| | Power Supply Safety / EMC | - USA - UL listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
| | | |
|  | | | | | | |
| | | Part Number | Qty | Description | | SC745TQ-700 Chassis | CSE-745TQ-700
CSE-745TQ-700B | 1
1 | 4U Chassis (Beige)
4U Chassis (Black) | | Bezel Filter | - | 1 | Front Bezel Filter | | Cable(s) | CBL-0044L
CBL-0084
CBL-0087
CBL-0157L | 4
1
1
1 | SATA Cable (2 Ft, Amphenol)
6" Split Converter Cable
Front Panel Ribbon Cable
8-pin to 8-pin Ribbon Cable for SGPIO (Supports Up to 4 Drives) | | Fan(s) | FAN-0074L4
FAN-0082L4 | 3
2 | 5000 RPM Hot-Swappable Cooling Fan
5000 RPM Hot-Swappable Rear Exhaust Fan | | Hard Drive | CSE-PT17(B)
BPN-SAS-743TQ | 8
1 | 1" Hard Drive Carrier Trays (B = Black)
SAS / SATA Hard Drive Backplane with AMI MG9072 Chip [ Manual ] | | Power Supply | PWS-702A-1R
PDB-PT745-8824
CSE-PT745-PDN24
CSE-PT0130 | 1
1
1
1 | 700W Power Supply
SC745 24-pin redundant power distributor
Power Supply Backplane
Dummy Power Cover | | Air Shroud | MCP-310-48001-0N | 1 | SC745 Intel DP X8.X7 PC Air Shroud [ Manual ] | | | | | |
| | | Part Number | Qty | Description | | Cable(s) | CBL-0153L
| -
| 6pin GPU power extension from PDB 2x big 4pin, 16cm
| | Cable Management Arm | MCP-290-00073-0N | - | Supermicro Cable Management Arm for 2U, 3U and 4U chassis (Extendable Length: 70mm to 830mm) | | Heatsink / Retention | - | - | Please refer to our Thermal Components Matrix | | Mounting Rails | CSE-PT26L-B | - | 4U Chassis Rail Kit (Includes Side Handles) (B = Black) | | LCD Module | MCP-220-00095-0B | - | Black 5.25 LCD tray wo rail, support 1x 3.5 HDD | | Add-on Card Dummy | MCP-240-00096-0N | - | GPU / Add-on Card Dummy Assembly (2 Slots)-Single Pack | | Rear Exhaust Fan | MCP-320-00046-0N-KIT
MCP-320-00047-0N-KIT | -
- | Rear fan kit(8.2K RPM fan) for SC747B / 835X / 836BHRear fan kit(5K RPM fan) for SC745B / 835X / 836BH | | Peripheral Drives | DVM-LITE-DVDRW24-HBT
| -
| BLACK LITE-ON 5.25" HH 24X DVD-RW SATA DRIVE PBF | | HDD Tray Converter | MCP-220-00080-0B | - | Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray | | | | |
|
| |
