 |
|
 |
| MBD-X7SPA-H-O |
- X7SPA-H (Standard Retail Pack)
|
| MBD-X7SPA-H-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 6.7" x 6.7" (17.02cm x 17.02cm)
|
| |
|
| CPU |
- Intel® Atom™ D510 processor
|
| System Bus |
|
| |
|
| Memory Capacity |
- Two 200-pin SO-DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR2 667MHz SO-DIMM (Single Channel)
|
| Memory Type |
- DDR2 667MHz unbuffered, non-ECC SO-DIMM
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
| Chipset |
|
| SATA |
- Intel ICH9R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
|
| Network Controllers |
- 2x Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics |
- Onboard Intel GMA3150 video
|
| Super I/O |
|
| |
|
| Serial ATA |
- 6 Serial ATA ports ( 3Gbps )
|
| LAN |
|
| USB |
- 8x USB 2.0 / 1.1 compatible
- 2 rear + 3 headers (5 ports) + 1 Type A connector
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
|
|
| 1U Chassis |
|
| |
|
| PCI-Express |
- 1 (x4) PCI-Express (in x16 slot)
|
| |
|
| Software |
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of two 4-pin fan headers
- 2 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 2 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
| |
|
|
| Environmental Spec. |
- Operating Temperature: 0°to 55°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
| FCC |
|
|
