 |
 |
| Form Factor |
|
Extended ATX |
 |
| Dimensions |
|
12.05" x 13.05" (30.6cm x 33.2cm) |
|
|
|
| CPU |
|
• Dual mPGA700 ZIF Sockets
• Supports up to two Intel® Itanium® processor(s) with 9MB Integrated Advanced Transfer Cache up to 1.60GHz |
|
| System Bus |
|
400MHz system bus |
|
|
|
| Memory Capacity |
|
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• 4-Way Interleaved Memory
• 4x Memory Modules must be populated
at the same time |
|
| Memory Type |
|
DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
512 MB, 1 GB, 2 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
• Intel® E8870 chipset
• SNC + SIOH + MRH_D + SPS + ICH4 + P64H2 |
|
| SCSI |
|
• LSI Logic SCSI Controller
• with HOST RAID
• Dual-Channel Ultra320 SCSI |
|
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
|
| Network Controllers |
|
• 1x Intel® 82546EB Dual Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
| PCI Expansion |
|
• 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot |
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
| USB |
|
Up to 6x USB 2.0 ports |
|
| Serial Ports |
|
• 1x External Serial Port
• Internal header supporting
2x Fast UART 16550 serial ports |
|
|
|
|
|
| 1U Chassis |
|
• SC813HS-500 |
| 2U Chassis |
|
• SC823HS-R500RC |
|
| Important Note |
|
To ensure system stability, a 500W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. |
|
|
|
| BIOS Type |
|
6MB AMI® Flash BIOS (total of 6x BIOS Chips) |
|
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• PCI 2.2
• ACPI 1.0 (limited)
• Hardware BIOS virus protection |
|
|
|
| Software / Hardware |
|
• Optional IPMI (Intelligent Platform
Management Interface) 1.5
• Super Doctor III
• Watch Dog |
|
| Power Configurations |
|
• ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Keyboard Wakeup from Soft-Off
• CPU Fan auto-off in sleep mode
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on |
|
|
|
| CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage
regulator with auto-sense
from 1.1V-1.5V
• Auto-switching for VRMs |
|
| FAN |
|
• Total of eight 3-pin fan headers
• 8x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support
• Thermal control for 8x fan connectors
• I2C temperature sensing logic |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header |
|
|
