 |
 |
| MBD-PDSMP-8-B |
|
| |
 |
| Form Factor |
|
| Dimensions |
- 11.2" width x 16.2" length , (28.4cm x 41.1cm)
|
| |
 |
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor with 256KB L2 Cache
- Hyper-Threading (HT) capable
- Will not support E2000 processors
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
 |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533/400MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
 |
| Chipset |
- Intel E7230 (Mukilteo) Smithfield chipset
- ICH7R + PXH + Intel® 82573V
|
| SCSI |
- Adaptec AIC-7902
- Host RAID (0, 1, 10)
|
| SCSI ZCR |
|
| Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
- Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
|
| IPMI |
|
| Network Controllers |
- 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 1000BASE-TX, RJ45 output
|
| VGA |
- On-board ATI RageXL graphics, 8MB
|
| Super I/O |
|
| |
 |
| Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
| SCSI |
- 2x Ultra 320 Single Channel SCSI Connectors
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- 6x USB 2.0 compliant / 1.1 compatible
- 4 internal USB headers
- 2 rear ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x serial header
|
|
 |
 |
 |
| 1U |
|
| Important Note |
- Use only with Supermicro 1U chassis recommended
|
| |
 |
| PCI-Express |
|
| PCI - X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 1x 64-bit 100MHz PCI-X (3.3V) slot (ZCR support)
|
| |
 |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- USB Keyboard support
|
| |
 |
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
 |
| CPU |
- Monitors for CPU Cores (+3.3V, +5, ±12V, +5V Standby)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Fan Speed Control
- Total of four proprietary fan headers
- 4 fans with tachometer monitoring
- Status monitor with firmware / software speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
 |
| FCC |
- Passed to meet FCC standard requirement
|
|