About Us Products Support News Where To Buy
About Us Company Milestones Investor Relations Careers Contact Policies
SuperServer® SuperBlade® Motherboards Chassis Accessories configurator AMD Solutions
Support Downloads Online Support Product Manuals RMA archive
Newsroom Events & Conferences News Press Releases
Asia / Middle East Pan Europe North America Central America South America Other Regions GSA


Super Micro Computer, Inc.
Contact Us


Reseller Resource Center

  Products   Motherboards   Xeon® Boards   [ X9DRFF-7 ]

Supermicro motherboard X9DRFF-7
Key Features
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
2. Intel® C602J chipset; QPI up to 8.0GT/s
3. Up to 512GB ECC DDR3, up to
    1866MHz; 8x DIMM slots
4. Expansion slots: 2 PCI-E 3.0 x16
5. Intel® 82574L Dual port GbE LAN
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS2 (6Gb/s) ports via LSI 2308
8. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
9. 2x USB 2.0 ports (rear)
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility
Product SKUs
  • X9DRFF-7 (Bulk Pack)
Physical Stats
Form Factor
  • Proprietary
  • 8.54" x 19.92" (21.7cm x 50.6cm)
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 130W TDP **)
  • Dual Socket R (LGA 2011)
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity
  • 8x 240-pin DDR3 DIMM slots
  • Up to 512GB DDR3 ECC LRDIMM
  • Up to 256GB DDR3 ECC RDIMM
  • Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
  • Intel® C602J chipset
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
     SATA 3.0 6Gb/s with RAID 0, 1
  • SAS2 (6Gb/s) via LSI 2308
  • SW RAID 0, 1, 10 support
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82574L Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
  • Matrox G200eW (Nuvoton WPCM450 BMC)
Input / Output
  • 2x SATA 3.0 ports (6Gb/s)
  • 4x SATA 2.0 ports (3Gb/s)
  • 8x SAS2 ports (6Gb/s)
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
  • 2x USB 2.0 ports (rear)
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port
  • 1 DOM (Disk on Module) power connector
  • 1 TPM 1.2 20-pin Header
Chassis (Optimized for X9DRFF-7 )
Tower / 4U Rackmount
  • CSE-F418IL-R1K62B
  • CSE-F418IL-R1K62B
  • CSE-F424AF-R1K28B
  • CSE-F424BD-R1K28B
Important Chassis Notes
  • This motherboard is designed only for FatTwin™ chassis

Expansion Slots
  • 2 PCI-E 3.0 x16 slots

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
  • 4x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
  • Suspend Static indicator LED
  • UID/Remote UID
Other Features
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (bulk)
  Part Number Qty Description
Motherboard MBD-X9DRFF-7 1 X9DRFF-7 Motherboard (only comes with server)
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference

Note:  X9DRFF-7 is for server SKUs (FatTwin™) only, please contact Supermicro sales for more details.

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.