 |
|
 |
| MBD-X7SBL-LN1-O |
- X7SBL-LN1 (Standard Retail Pack)
|
| MBD-X7SBL-LN1-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 9.6" width x 9.6 " length , (24.4cm x 24.4cm), 6 layers
|
| |
|
|
| CPU |
- Single LGA775 ZIF Socket
-
Supports Quad-Core Intel® Xeon® X3300/X3200 series
-
Supports Dual-Core Intel® Xeon® E3100/3000 series
-
Supports Intel® Xeon® processor L3360 and L3110
series
-
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
-
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
-
Supports Intel® Pentium® E5000/E2000 series
-
Supports Intel® Celeron® E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
| System Bus |
- 1333 / 1066 / 800 MHz system bus
|
| |
|
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel)
|
| Memory Type |
- DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel® 3200 chipset
- ICH9R chipset
|
| Serial ATA |
- Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers |
- 1x Intel® 82573V Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
|
| VGA |
- On-board XGI Volari Z9S 32MB graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 7x USB 2.0 / 1.1 compatible
- 2 rear + 2 headers ( 2 ports ) + 1 on-board
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Header
|
|
|
|
|
|
| Mid-Tower |
|
| Tower / 4U Rackmount |
|
| Important Note |
- To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is recommended.
|
| |
|
|
| PCI-Express |
- 1 (x8) PCI-E slot
- 1 (x4) PCI-E (using x8) slot
|
| PCI |
- 2x 32-bit 33MHz PCI (5V) slot
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal / External Modem Rign-on
- Suspend to RAM (STR)
|
| |
|
|
| CPU |
- Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT
- CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
|
| FAN |
- Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend state indicator LED
- Standby Power alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
