 |
 |
| MBD-X6QTE+-O |
- X6QTE+ (Standard Retail Pack)
|
| MBD-X6QTE+-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 16" x 14.3" (406.4mm x 363.2cm)
|
| |
|
|
| CPU |
- Quad 604-pin FC-mPGA4 Sockets
- Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 7100 Series with 2MB L2 Integrated Advanced Transfer Cache (CPUs must be 95W or less)
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 64GB Registered ECC DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs and all be of same type
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® E8501 chipset
- MCH + ICH5R + 82571
|
| SATA |
- ICH5R SATA Controller
- RAID 0, 1, JBOD support
|
| IPMI |
|
| Network Controllers |
- Dual Intel® 82571EB Single Port PCI-e Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- ATI ES1000 SVGA PCI video controller with 16 MB of video memory
|
| Super I/O |
|
| |
|
| Serial ATA |
- Two Serial ATA ports
- Two SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
|
|
|
| 1U Chassis |
|
| Important Chassis Notes |
- To ensure system stability with Quad CPUs, a 1000W (minimum) ATX power supply
[8-pin (+12V), 8-pin (+12V) and 24-pin are required]
- To ensure system stability with Cranford Dual Core CPUs, a (800W (TBD)minimum) ATX power supply
[8-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for CPUs with this serverboard.
|
| |
|
| PCI-Express |
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
|
| |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on Mode for AC Power Recovery
- Internal/External modem remote ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
|
| FAN |
- Total of nine 3-pin fan headers
- 9x fans with status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin Fans
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C Temperature Sensing Logic
- Thermal Monitor 2 support
|
| LED |
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
