About Us Products Support News Where To Buy
About Us Company Milestones Investor Relations Careers Contact Policies
SuperServer® SuperBlade® Motherboards Chassis Accessories configurator AMD Solutions
Support Downloads Online Support Product Manuals RMA archive
Newsroom Events & Conferences News Press Releases
Asia / Middle East Pan Europe North America Central America South America Other Regions GSA
 
 
X6DHR-8G (OEM Only)
Super Micro Computer, Inc.
Contact Us

Search

Reseller Resource Center
  Products   Motherboards   Xeon Boards   [ X6DHR-8G ]
X6DHR-8G
Key Features
1. Dual Intel® 64-bit Xeon® Support,
   up to 3.80 GHz, 800 MHz FSB
2. Intel® E7520 (Lindenhurst) Chipset
3. Up to 16GB DDR 333 SDRAM (or)
    Up to 32GB DDR 266 SDRAM
4. Intel® 82546GB dual-port Gigabit
    Ethernet Controller
5. Adaptec AIC-7902 Dual-Channel
    Ultra320 SCSI
6. 2x SATA Ports via ICH5R
    SATA Controller
7. 1 (x8) & 1 (x4) PCI-Express,
    2 x 64-bit 133MHz PCI-X
8. IPMI 2.0 Socket
9. ZCR Support
10. ATI RageXL 8MB Graphics

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs
MBD-X6DHR-8G-B
  • X6DHR-8G (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13.05" (30.5cm x 33.2cm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
 
System Memory
Memory Capacity
  • Eight 184-pin DIMM sockets
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 32 GB DDR 266 MHz memory
  • Dual-channel memory bus
  • Memory must be populated in pairs
  • Single-rank modules are recommended for 6+ DIMM support
Memory Type
  • DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® E7520 chipset
  • MCH + ICH5R + PXH +82546GB
SATA
  • ICH5R SATA Controller
  • RAID 0, 1, JBOD support
SCSI
  • Adaptec AIC-7902 Controller
  • Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
  • Host RAID 0, 1, 10, JBOD support
RAID
  • Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
  • (Card not included)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 (Optional)
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • Winbond 83627HF chip
 
Input / Output
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
Chassis ( Optimized for X6DHR-8G )
1U Chassis
Important Chassis Notes
  • To ensure system stability, a 420W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 20-pin are required]
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-Express / PCI-X
  • 1x Universal SXB-E slot for:
        1x 64-bit PCI-X 133MHz or
        1x PCI-Express x8
  • 1x Universal SXB-E slot for:
        1x 64-bit PCI-X 133MHz or
        1x PCI-Express x4(signal) in x8 slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • CPU Fan auto-off in sleep mode
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
FAN
  • Total of five 3-pin fan headers
  • 5x fans with status monitoring
  • Status monitor with firmware/software on/off control
  • Fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 support
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC support
 
OS Compatibility

• Please see our OS Compatibility Chart
Standard Bulk Package
  Part Number Qty Description
X6DHR-8G MBD-X6DHR-8G-B 1 X6DHR-8G Motherboard
Manual(s) MNL-0735 1 Motherboard Manual for X6DHR-8G
I/O Cables CBL-022
CBL-036L-02
1
1
ATX Floppy Cable
ATA 66/100 IDE LP Cable
Driver Disk CDR-INTC 1.20 1 Version 1.20 CD or later

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
** 4GB Memory has not been verified due to temporary module unavailability.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.