 |
|
 |
| MBD-X6DHR-C8-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
|
| |
|
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH/V + 4x 82546GB + CN-1230
|
| SATA |
- ICH5R SATA Controller
- RAID 0, 1, JBOD support
|
| SCSI |
- Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 (Optional [1U: 1UIPM20-E])
|
| Security |
- Cavium Nitrox®
- Cavium CN-1230 Security Microprocessor
- Supports firewall VPN, SSL VPN, Intrusion Detection, Security and Gateway Application Servers
- High-Performance SSL and IPsec
- Integrated Networking with routers, switches, web-servers, server load balancers, firewalls, SANs and VPN Gateways
- RJ45 / SFP (optical) output
|
| Network Controllers |
- Intel® 82546GB (Anvik II) Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45/SFP output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| |
|
|
| Serial ATA |
- Two Serial ATA ports
- Two SATA hard drives supported
|
| IDE |
- One slim IDE channel support up to two UDMA IDE devices
- Supports ATA/100
- 50-pin Compact Flash Type-I slot
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
- 4x RJ45 LAN ports and
- 4x SFP (Small Form-factor Pluggable)
|
| USB |
- 2x USB rear ports
- 1x USB internal headers (supports 2 ports)
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports (1 port, 1 header)
|
|
|
|
|
|
| 1U Chassis |
SC813S-500C-C8
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
|
|
| PCI-Express / PCI-X |
- 1x Universal (SXB-E) slot
[ 1 (x8) PCI-Express slot ]
or
[ 1x 64-bit PCI-X 100MHz slot ]
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors for CPU Cores (+1.8, +3.3V, +5V, ±12V & +3.3V Standby, and VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
|
| FAN |
- Total of four 3-pin fan headers
- Total of four 4-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Status monitor for speed control
- Pulse Width Modulated(PWM) fan connector
- Support 3-pin fans(without speed control)
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
|
|
