 |
|
 |
| MBD-X6DA3-G2-O |
- X6DA3-G2 (Standard Retail Pack)
|
| MBD-X6DA3-G2-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Paxville) Dual Core CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| |
|
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® E7525 chipset
- MCH + ICH5R + PXH +82546GB
|
| SATA |
- ICH5R SATA Controller
- RAID 0, 1, JBOD support
|
| SAS |
- Adaptec AIC-9410W Controller
- Host RAID 0, 1, 10
|
| ZCR |
- Support for Zero-Channel RAID
- Optional: (Card not included)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 (Optional)
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- AC'97 audio CODEC with high quality 6-channel sound
|
| Super I/O |
|
| |
|
|
| Serial Attached SCSI |
- Two 4-port SAS connectors
- Up to Eight SAS hard drives supported
|
| Serial ATA |
- Two Serial ATA ports
- Two SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 4x USB rear ports
- 4x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
| Parallel Port |
- 1 ECP / EEP parallel port
|
| Audio |
- 1 Line-In / Line-Out / Microphone Port
- 6-channel Surround Sound
|
|
|
|
|
|
| 2U Chassis |
|
| 3U / Mid-tower Chassis |
|
| Tower / 4U Rackmount |
|
| Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- To ensure system stability with non-Paxville CPUs, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
|
|
| PCI-Express |
- 1 (x16) slot
- 1 (x4) using (x16 slot)
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- USB Keyboard Support
- RTC (Real Time Clock) Wakeup
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Suspend to RAM (STR)
- Power-on mode control for AC power loss recovery
- Internal / External modem remote ring-on
|
| |
|
|
| Voltage |
- Monitors for CPU Cores (+1.8V, +3.3V, +5V, ±12V & +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
|
| FAN |
- Total of eight 4-pin fan headers
- 8 proprietary fan headers
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
- Support 3-pin fans (without speed control)
- Status monitor for on/off control
- Status monitor for speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- I2C temperature sensing logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
