 |
 |
- Seven onboard voltage monitors for CPU core/s, CPU I/O, +3.3V, ± 5V, and ± 12V
- Three-fan status monitor with firmware/software on/off control
- CPU/chassis temperature monitoring
- CPU fan auto-off in sleep mode
- CPU overheat alarm, LED and control
- Chassis intrusion detection
- System resource alert
- Hardware BIOS virus protection
- Auto-switching voltage regulator for CPU core, up to 20A of current
|
 |
|
|
- Microsoft OnNow
- Slow blinking LED for sleep-state indicator
- BIOS boot support for USB keyboard
- Real-time clock wake-up alarm
- Main switch override mechanism
- Remote modem ring-on when system is in SoftOff state
|
|
|
|
|
- The SUPER P6SBM running at bus speed of 66/100 MHz, supports single Intel Pentium III/II and Celeron Slot1 233-700 MHz processors. The P6SBM is based on Intel’s 440BX chipset, which enables AGP, 66/100 MHz SDRAM, concurrent PCI and Ultra DMA with a 33 MB/s burst data transfer rate.
- The SUPER P6SBM comes with 3 PCI and 1 ISA slot (including one ISA/PCI shared slot) and an AGP connector. AGP reduces contention between the CPU and I/O devices by broadening the bandwidth of graphics to memory. It delivers a maximum 532 MB/s 2x transfer mode, which is quadruple the PCI speed. AGP offers a quantum-leap improvement in 3D graphics performance with far richer texture content!
- The SUPER P6SBM is a microATX (9.6” x 8.05”) form factor board that can accommodate a total of 768 MB 3.3V EDO or 384 MB unbuffered SDRAM memory at 66 MHz in 3 168-pin DIMM sockets.
- Onboard ESS Solo1 PCI Audio with emulated 3D sound offers quality sound for PC entertainment.
- Included I/O: 2 EIDE ports, a floppy port, an ECP/EPP parallel port, PS/2 mouse and PS/2 keyboard, 2 serial ports, an infrared port and 2 USB ports.
- Other features that maximize customer satisfaction and provide simplicity in managing the computer are:
- PC 98-ready and support for Advanced Configuration and Power Interface (ACPI).
- With PC Health Monitoring, you can protect your system from problems even before they occur.
- Overheat LED indication connector
- Three tachometer fan connectors, which includes a thermal control tachometer fan connector for preventing system overheating.
- Onboard auto-switching power regulator
- Wake-on-LAN allows for remote network management and configuration of the PC, even in off-hours when the PC is turned off. This reduces the complexity of managing the network.
- DMI support
- ACPI/APM power management
- RTC wakeup
- External modem ring-on
- Keyboard wake-up
- Power-up mode control upon recovery from AC power loss
- Simple jumper settings
- 1Mb AWARD BIOS
|
|
