 |
|
 |
| MBD-X9SCD-F
-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 4.75" x 15.95", (12.06cm x 40.51cm)
|
| |
|
| CPU |
-
Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors
*** *
- Socket H2 (LGA 1155)
|
| |
|
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated UDIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- 2x SATA3 HDD support to BP (6Gbps)
- 1x SATA2 header onboard
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
- BMC integrated Matrox G200
|
| Super I/O |
|
| |
|
| Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
|
| LAN |
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB 2.0 ports (1 header + 1 type A)
|
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
| DOM |
- 1x DOM (Disk on Module) power connector
|
| TPM |
|
|
|
|
|
|
| 3U Chassis |
|
| Important Chassis Notes |
|
| |
|
|
| PCI-Express |
- 2 (x8) PCI-E 3.0 slots***
|
| |
|
|
| BIOS Type |
- 8MB SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
| |
|
|
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- 1x fan header with tachometer status monitoring
|
| Temperature |
- CPU thermal trip support
- FC temperature sensing logic
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
- UID/Remote UID
|
| Other Features |
|
|
