About Us Products Solutions Support News Where To Buy
About Us Company Milestones Investor Relations Careers Contact Policies Sitemap
SuperServer® SuperBlade® MicroBlade Motherboards Chassis Accessories AMD Solutions
Virtualization® Cloud® Software Defined Storage Big Data Virtual Desktop and Gaming
Support Downloads Online Support Onsite Services Manual QRG RMA Warranty
Newsroom Events & Conferences News View Video Press Releases
Asia / Middle East Pan Europe North America Central America South America Other Regions GSA


Super Micro Computer, Inc.
Contact Us


Reseller Resource Center

  Products   Motherboards   Xeon® Boards   [ X9DRL-7F ]

Supermicro motherboard X9DRL-7F
Key Features
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
2. Intel® C602J chipset
3. Up to 512GB ECC DDR3, up to 1866MHz;
    8x DIMM slots
4. Expansion slots: 2 PCI-E 3.0 x8,
    1 PCI-E 2.0 x4 (in x8), 1 PCI-E 2.0 x1
5. Intel® i210 GbE LAN, 2 ports
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS ports via LSI 2208
8. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
9. 7x USB 2.0 ports
    (4 rear, 2 via header + 1 Type A)
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Quick Reference Guide
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility
Product Intro Video
Product SKUs
  • X9DRL-7F (Standard Retail Pack)
  • X9DRL-7F (Bulk Pack)
Physical Stats
Form Factor
  • ATX
  • 12" x 10" (30.48cm x 25.4cm)
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 130W TDP **)
  • Dual Socket R (LGA 2011)
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity
  • 8x 240-pin DDR3 DIMM slots
  • Up to 512GB DDR3 ECC LRDIMM
  • Up to 256GB DDR3 ECC RDIMM
  • Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
  • Intel® C602J chipset
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 10
  • SAS2 from LSI 2208
  • HW RAID 0, 1, 10 support
  • Battery Backup Unit (BBU) is not supported
  • Supports up to 16 devices as default, more HDD devices support is also available as an option *

    * For special sku, please contact your Supermicro Sales.
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i210 Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
  • Matrox G200eW
Input / Output
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
  • 8 SAS ports
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
  • 7 USB 2.0 ports total
    (4 rear + 2 via header + 1 Type A)
  • 1 VGA port
Serial Port / Header
  • Total of 2 COM ports: 1 rear, 1 via header
  • 1 DOM (Disk on Module) power connector
  • 1 TPM 1.2 20-pin Header
Chassis (Optimized for X9DRL-7F)
1U Chassis
2U Chassis
  • CSE-826TQ-653B
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DRL-7F

Expansion Slots
  • 2 PCI-E 3.0 x8
  • 1 PCI-E 2.0 x4 (in x8)
  • 1 PCI-E 2.0 x1
System BIOS
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
  • PCH cores (1.1V and 1.5V)
  • 6x 4-pin fan headers with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
  • Dual Cooling Zones
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DRL-7F MBD-X9DRL-7F 1 X9DRL-7F Motherboard
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
- TPM module with Infineon 9655, RoHS/REACH,PBF;
Vertical or Horizontal depends on the server
SuperDOM - - Supermicro SATA DOM Solutions [Details]
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.