 |
|
 |
| MBD-X6DHP-3G2-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 9.6" x 16.2" (24.4cm x 41.1cm)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
|
| |
|
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
|
| SAS |
- Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
|
| SATA |
- ICH5R Controller
- RAID 0, 1, JBOD support
|
| SAS Zero-Channel RAID |
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR2 or AOC-LPZCR3
- Optional: (Card not included)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
-
(Optional IPMI Card: AOC-1UIPMI-B)
- 3rd LAN(GbE) port (Optional: AOC-1UIPMI-LANG) *Must be used with Optional IPMI Card above.
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| |
|
|
| SAS |
- Four internal SAS ports
- Four external SAS ports
|
| IDE |
- Dual EIDE channels support up to four UDMA/ IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
|
|
|
|
|
| 1U Chassis |
- SC816 Series (OEM Only)
- SC816TQ-600
- SC816TQ-R600
|
| |
|
|
| PCI-Express / PCI-X |
- 1x Universal (SXB-E) slot =
[1 (x8) PCI-E slot] or
[1x 64-bit PCI-X 100MHz slot]
- 1x Universal (SXB-E) slot =
[1 (x8) PCI-E slot] or
[1x 64-bit PCI-X 100MHz slot]
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
|
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby & VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense
|
| FAN |
- Total of five proprietary fan connectors supporting 10 fans
- 10x fans with Tachometer status monitoring
- Status monitor for speed control
|
| Temperature |
- Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal control for 10x fan connectors
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC support
|
|
