 |
|
 |
| SYS-5014C-MR |
- SuperServer 5014C-MR (Beige)
|
| SYS-5014C-MRB |
- SuperServer 5014C-MRB (Black)
|
| |
|
|
| CPU |
- Single LGA775 (Prescott) ZIF Socket
- Supports an Intel® Pentium® 4 processor 6xx sequence on 90nm process ONLY (800MHz FSB) or
- Supports an Intel® Celeron® processor with 256KB L2 cache (533MHz FSB)
- Hyper-Threading (HT) enabled
|
| System Bus |
|
| |
|
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 4 GB DDR2 400 / 533MHz unbuffered ECC memory
- Dual channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- DDR2 400 / 533MHz unbuffered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB
-
Unbuffered ECC / non-ECC DDR2
- Total 256MB to 4GB memory
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| Chipset |
- Intel E7221 (Copper River) chipset
- ICH6R + FWH + BCM5721
|
| Serial ATA |
- Intel® ICH6R SATA controller
- RAID 0, 1, JBOD support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
|
| Network Controllers |
- 2x Broadcom BCM5721 Gigabit Ethernet Controllers
- Supports 10/100/1000BASE-T, RJ45 output
|
| Graphics |
- Onboard integrated server quality graphics in MCH
|
| Super I/O |
|
| |
|
|
| PCI-Express / PCI-X |
- 1x 64-bit PCI-X 133MHz slot (Riser card required)
|
| |
|
|
| Serial ATA |
- Up to one SATA hard drive supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| Infrared |
|
| LAN |
|
| USB |
- 2x USB 2.0 / 1.1 ports
- 4x USB 2.0 / 1.1 header for 4x ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial ports
- 1x serial header
|
| Parallel Port |
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AwardBIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
|
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
|
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
|
| Ports |
- 2x USB Ports (USB 2.0 Ready)
|
|
|
|
| Floppy |
- 3.5" 1.44MB Slim Floppy Drive
|
| CD-ROM |
|
|
|
|
| Fans |
- 1x 5K RPM 10cm Blower Fan
|
| |
|
|
Thermal control 260W AC power supply with PFC
[ 24-pin, 4-pin=12V, (2) 4-pin ] |
| AC Voltage |
- 100 - 240V, 60-50Hz, 4 Amp Max
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
|
| Safety / EMC |
- USA - UL Listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
|
| |
|
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
- CPU Core 4-Phase-switching voltage regulator w/ auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of five 3-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware/software speed control
- Support 3-pin fans
|
| Temperature |
- Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal control for 5x fan connectors
- I2C temperature sensing logic
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
