 |
 |
| SYS-5015TB-10GB |
- SuperServer 5015TB-10GB (Black)
|
| |
 |
| CPU |
- Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3000 Sequence
- Supports an Intel® Core™2 Extreme QX9000/QX6000 series
- Supports an Intel® Core™2 Quad Q9000/Q6000 series
- Supports an Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports an Intel® Pentium® dual-core E2000 series
- Supports an Intel® Celeron® dual-core E1000 series
- Supports an Intel® Celeron® 400 series
- NOTE: 1600MHz CPU has to use 1600 MHz XMP Memory
|
| System Bus |
- 1600 / 1333 / 1066 / 800 MHz system bus
|
| |
 |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz XMP DDR3 memory
|
| Memory Type |
- DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
| Memory Voltage |
|
| |
 |
| Chipset |
- Intel X48 chipset
- ICH9R + Intel® 82573V + Intel® 82573L
|
| Serial ATA |
- Intel® ICH9R SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 (Windows)
- RAID 0, 1, 10 (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers |
- Intel® 82598EB 10 Gigabit Ethernet Controller with CX4 interface
- Intel® 82573V & 82573L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- On-board XGI Volari Z9S (32MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
 |
| Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
| LAN |
|
| USB |
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports + 2 internal headers + 2 Type A ports
|
| VGA |
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| |
 |
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
 |
 |
 |
| Form Factor |
|
| Model |
|
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
 |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
 |
| PCI-Express |
- 1 (x16) PCI-e 2.0 slot (Low Profile)
|
| |
 |
| Hot-swap |
- 2x 3.5" SATA Hot-swap drive bays
|
| |
 |
| 1U SATA Backplane |
| |
 |
| Fans |
|
| |
 |
| 700W / 780W AC to DC power supply w/ PFC |
| AC Input |
- 100-240V, 60-50Hz, 9.5-3.5Amp
|
| +5V sb |
|
| +12V |
- 65 Amp @ 180-240Vac
- 58 Amp @ 100-140Vac
|
| |
 |
| Software |
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
 |
| CPU |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
| FAN |
- Total of three 4-pin fan headers
- 3x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
|
| |
 |
RoHS
|
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|