 |
|
 |
| SYS-6013P-8+ |
- SuperServer 6013P-8+ (Beige)
|
| SYS-6013P-8+B |
- SuperServer 6013P-8+B (Black)
|
|
|
| CPU |
|
• Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 1MB integrated Advanced Transfer Cache up to 3.20GHz |
 |
| System Bus |
|
533MHz/400MHz system bus |
|
|
|
| Memory Capacity |
|
• Six 184-pin DIMM sockets
• Supports up to 12 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs |
|
| Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
256 MB, 512 MB, 1 GB, 2 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
• Intel® E7501 chipset
• MCH + ICH3-S + P64H2 |
|
| SCSI |
|
• Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI |
|
| RAID |
|
Support for Zero-Channel RAID w/ Supermicro Socket DIMM All-In-One ZCR Card AOC-SOZCR1
(Card not included) |
|
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
|
| Network Controllers |
|
• Dual Port Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
• 1x full-height, full-length 64-bit 133/100MHz PCI-X (3.3V) expansion slot (Riser card required) w/ VXB (Virtual Extended Bus) slot
• 1x low-profile slim 64-bit 100MHz PCI-X (3.3V) expansion slot (Riser card required)
|
|
|
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
|
| USB |
|
1 USB port |
|
| Serial Ports |
|
1 Fast UART 16550 serial ports |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
|
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Hardware BIOS virus protection |
|
|
|
|
|
| Height |
|
1.7" (43mm) |
|
| Width |
|
17.2" (437mm) |
|
| Depth |
|
25.6" (650mm) |
|
| Gross Weight |
|
42 lbs (19.0 kg) |
|
| Available Colors |
|
Beige, Black |
|
|
|
| Buttons |
|
• Power On/Off button
• System Reset button
|
|
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
|
|
| Ports |
|
none |
|
|
|
| Hotswap |
|
4 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE |
|
|
|
| Floppy |
|
TEAC 3.5" 1.44MB Slim Floppy Drive |
|
| CD-ROM |
|
TEAC Slim 24x CD-ROM drive |
|
|
|
| 1x SCA813S 1U SCSI Backplane w/ SAF-TE |
|
|
|
Cold-swappable 500W AC power supply module w/ PFC
[ 20-pin, (8-pin=12V) ] |
|
| AC Voltage |
|
• 100 - 240V, 60-50Hz, 10 Amp |
|
| DC Output |
|
• 5V + 3.3V ≤ 160W |
|
| +5V |
|
30.0 amp |
|
| +5V standby |
|
2.0 amp |
|
| +12V |
|
39.0amp |
|
| -12V |
|
1.0 amp |
|
| +3.3V |
|
21.0 amp |
|
|
|
| CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby
• CPU Core 4-Phase-switching voltage regulator with
auto-sense from 1.3V-1.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
• Total of three 3-pin
fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header
• Chipkill support
• Super Doctor III
• Watch Dog |
|
|
