 |
|
 |
| SYS-6014H-T |
- SuperServer 6014H-T (Beige)
|
| SYS-6014H-TB |
- SuperServer 6014H-TB (Black)
|
| |
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| |
|
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 32GB DDR 266MHz or up to 16GB DDR 333MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR 333/266MHz buffered (registered) ECC SDRAM, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH/V + 82546GB
|
| SATA |
- ICH5R SATA 2-port Controller
- RAID 0, 1 support
|
| SATA |
- Marvell® 4-port SATA Controller
- RAID 0, 1, JBOD support
|
| Zero-Channel RAID |
- Supports RAID 0, 1, 5, 10, JBOD
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
- (Card not included)
|
| IPMI |
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| PCI-Express / PCI-X |
- 2 x Universal (SXB-E) slots
[ 2 (x8) PCI-Express Slots ] OR
[ 1x 64-bit PCI-X 133MHz slot and
1x 64-bit PCI-X 100MHz slot]
|
| |
|
| Serial ATA |
- Up to Four SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 1x USB dual internal headers supporting up to 2 USB ports
- USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports / 1 header
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
|
| Ports |
- 2x USB & DB9 COM port tray
(Optional - in place of floppy drive)
|
| |
|
|
| Hot-swap |
- 4x 3.5"SATA Hot-swap drive bays
|
| |
|
|
| Floppy |
- TEAC 3.5" 1.44MB Slim Floppy Drive
|
| CD-ROM |
- TEAC Slim 24x CD-ROM drive
|
| |
|
|
| 1x 1U Serial ATA backplane |
| |
|
|
| Fans |
|
| |
|
|
Cold-swappable 500W AC power supply module w/ PFC
[ 20-pin, (4-pin, 8-pin) = 12V ] |
| AC Voltage |
- 100 - 240V, 60-50Hz, 10 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V1 |
|
| +12V2 |
|
| +12V3 |
|
| -12V |
|
| +3.3V |
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, +3.3V Standby, & VBAT
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
|
| FAN |
- Total of five 3-pin fan headers
- Status monitor for speed control
|
| Temperature |
- Monitoring for CPU, chassis environment
- CPU Thermal Trip Support
- Thermal Monitor 2 (TM2) Support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- USB Keyboard Support
- Plug and Play (PnP)
- SMBIOS 2.3
- BIOS Rescue Hot Keys
- DMI 2.1
- Hardware BIOS Virus protection
- PCI 2.2
- ACPI 1.0
- Fan Speed Control
|
|
