 |  | | SYS-6015V-MT | - SuperServer 6015V-MT (Beige)
| | SYS-6015V-MTB | - SuperServer 6015V-MTB (Black)
| | |  | | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below: - Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz | | System Bus | - 1333 / 1066 / 667 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | |  | | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 24GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
| | Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | |  | | Chipset | - Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLC)
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
| | Network Controllers | - Two Intel® (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - XGI Volari™ Z7 PCI-E Graphics Processor
| | Clock Generator | | | Super I/O | | | |  | | PCI-X | - 1x 64-bit PCI-X 133MHz or PCI-e x8 slot (Riser card required)
| | |  | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB Support
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers for up to 4-ports
- Total 6 USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | Parallel Port | - 1 Header for ECP / EEP parallel port
| |  |  |  | | Form Factor | | | Model | |  |  | | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |  |  | | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | - 2x USB Ports (USB 2.0 Ready)
- 1x Serial COM Port
|  |  | | Hot-swap | - 4x Hot-swap SATA drive bays
|  |  | | DVD-ROM | - Slim 8x DVD, 24x CD, DVD-ROM drive
|  |  | | 1U SATA Backplane |  |  | | Fans | | | |  | | 520W AC to DC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50 - 60Hz, 7 - 3Amp
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | |  | | Safety / EMC | - USA - UL Listed, FCC
- Canada - CUL Listed
- Germany - TUV Certified
- Europe / CE Mark
- EN 60950/IEC 60950-Compliant
| | |  | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
| | |  | | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V
- 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
- Adjustable CPU Clock Frequency Ratio
| | FAN | - Total of six proprietary 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| |