| | SYS-6014V-T2 | - SuperServer 6014V-T2 (Beige)
| SYS-6014V-T2B | - SuperServer 6014V-T2B (Black)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | | | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB DDR-II 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
| Memory Type | - DDR2 400MHz registered ECC buffered SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Supports Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E7320 chipset
- MCH + 6300ESB + 82541GI
| SATA | - 6300ESB (Hance Rapids) SATA Controller (2x Drive support)
- 2x SATA Ports
- RAID 0, 1 support
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- (Optional:AOC-IPMI20-E ) Card not included.
| Network Controllers | - Dual Intel® 82541GI
Single Port Gigabit Controller - Support for 10Base-T, 100Base-TX, 1000BASE-T, and 2x RJ45
| Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| Super I/O | | Clock Generator | | | | PCI | - 1x 64-bit 66MHz PCI slot (Riser card required)
| | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| LAN | | USB | - 2x USB rear ports
- 1x USB internal header for 2 ports
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS (SST)
| BIOS Features | - Plug and Play (PnP)
- ACPI 1.0
- APM 1.2
- DMI 2.3
- PCI 2.2
- SMBIOS 2.3
- Hardware BIOS Virus protection
- USB Keyboard Support
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| Ports | | | | Hot-swap | - 2x 3.5"SATA Hot-swap drive bays
| | | SATA Hard Drive Backplane | | | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | Fans | - 2x 10cm 5,000 RPM blower fans
| | | Fixed 420W AC power supply with PFC [ 24-pin, (8-pin=12V) ] | AC Voltage | - 100 - 240V, 60-50Hz, 7 Amp Max
| DC Output | | +5V | | +5V standby | | +12V1 | | +12V2 | | +12V3 | | -12V | | +3.3V | | | | Safety / EMC | - USA - UL Listed, FCC
- Canada - CUL Listed
- Germany - TUV Certified
- Europe / CE Mark
- EN 60950/IEC 60950-Compliant
| | | CPU | - Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-1.63V
- Adjustable CPU clock frequency ratio
| FAN | - Total of six 4-pin fan headers
- 6x fans with status tachometer monitoring
- Status monitor for on/off control
- Status monitor for speed control
- Support for 3-pin fan and 4-pin fan speed control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V Standy Alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| |