 |
 |
| SYS-5025B-4B |
- SuperServer 5025B-4B (Black)
|
| |
 |
| CPU |
- Single LGA775 ZIF Socket
-
Supports Quad-Core Intel® Xeon® X3300/X3200 series
-
Supports Dual-Core Intel® Xeon® E3100/3000 series
-
Supports Intel® Xeon® processor L3360 and L3110
series
-
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
-
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
-
Supports Intel® Pentium® E5000/E2000 series
-
Supports Intel® Celeron® E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
| System Bus |
- 1333 / 1066 / 800 MHz system bus
|
| |
 |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
| Memory Type |
- DDR2 800/667MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
 |
| Chipset |
- Intel 3210 chipset
- ICH9R + PXH + Intel® 82573V + Intel® 82573L
|
| Serial ATA |
- Intel® ICH9R SATA controller built-in (3 Gbps)
|
| SCSI |
- Adaptec AIC-7901 Single-channel U320 SCSI Controller
- HostRAID 0, 1, 10 Supported
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- 200-pin IPMI slot
- (Optional: AOC-SIMLC-HTC)
- (Optional: AOC-SIM1U+)-KVM-over-LAN support
- NOTE: Must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI ES1000 (32MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
 |
| PCI-Express |
- 1 (x8) PCI-e slot
- 1 (x4) PCI-e slot
|
| PCI-X |
- 2 64 bit PCI-X 133 Mhz slot
- 2 64 bit PCI-X 100 Mhz slot
|
| |
 |
| Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
- External SATA supported
|
| LAN |
|
| USB |
- Up to 7x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal heades for 4 USB 2.0/1.1 ports + 1 on-board
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| |
 |
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|
 |
 |
 |
| Form Factor |
|
| Model |
|
| |
 |
| Height |
3.5" (89mm) |
| Width |
16.8" (426mm) |
| Depth |
25.6" (650mm) |
| Gross Weight |
50 lbs (22.7kg) |
| Available Colors |
Black |
| |
 |
| Buttons |
Power On/Off button
System Reset button
|
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
|
| Optional Front Bezel |
|
| |
 |
| Hot-swap |
6x 3.5" Ultra320/160 SCSI Hot-swap drive trays |
| Peripheral Bay(s) |
1x 5.25" full-height peripheral bay |
| |
 |
| CD-ROM |
TEAC Slim 24x CDROM Drive (Optional) |
| |
 |
| 1x 2U SCSI backplane |
| |
 |
| Fans |
|
| |
 |
| 400W AC high-efficiency power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 60-50Hz, 6-2.7 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
80 PLUS Certified
|
| |
 |
| CPU |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5 Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|