 | |
 | | SYS-5025M-4 | - SuperServer 5025M-4 (Beige)
| | SYS-5025M-4B | - SuperServer 5025M-4B (Black)
| | | |
| | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 (Prescott) processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
- 1MB L2 Cache
| | System Bus | - 1066 / 800 / 533 MHz system bus
| | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC / non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
| | Memory Type | - DDR2 667/533/400MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | | | | |
| | Chipset | - Intel E7230 (Mukilteo) chipset
- ICH7R + PXH-V + Intel® 82573V
| | SATA | - Intel® ICH7R SATA controller built-in
- RAID 0, 1, 5, 10
| | SCSI | - Adaptec AIC-7901
- HostRAID 0, 1, 10 Supported
- ZCR Support w/ optional card
| | IPMI | - 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: LPIPMI)
- RMM (Remote Management Module)
- (Card not included)
- 3rd LAN Optional
| | Network Controllers | - Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 1000BASE-T, RJ45 output
| | Graphics | - On-board ATI Rage XL (8MB) graphics
| | Super I/O | | | Clock Generator | | | | |
| | SCSI | - U320 Single Channel SCSI
- Adaptec AIC-7901
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 6x USB 2.0 compliant / 1.1 compatible
- 2 rear ports, 4 internal headers
- 2 in front (FUCI), 2 in rear
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x header
| | Parallel Port | - 1x ECP / EEP Parallel Port
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- SMBIOS 2.3
- USB Keyboard support
- PCI-X 1.0
| | | | | |
| | Height | 3.5" (89mm) | | Width | 16.8" (426mm) | | Depth | 25.6" (650mm) | | Gross Weight | 49 lbs (22.3kg) | | Available Colors | Beige, Black | | | |
| | Buttons | • Power On/Off button
• System Reset button | | LEDs | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
| | Ports | N/A | | | |
| | PCI-Express | | | PCI - X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | | |
| | Hot-swap | - 6x 3.5"SCA Ultra320/160 Hot-swap drives
| | Peripheral Bay(s) | - 1x 5.25" full-height peripheral bay
| | | |
| | 1x 2U SCA Ultra320/160 backplane (with SAF-TE) | | | |
| | Floppy | - Panasonic 3.5" 1.44MB Floppy Drive
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | |
| | Fans | 4x 80mm 3400 RPM fans | | | |
| 2U 400W AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] | | AC Voltage | - 100 - 240V, 47 - 63Hz, 7 Amp
| | DC Output | | | +5V | | | +5V standby | | | -5V | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio settings (via BIOS)
| | FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
| | LED | - CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |
