 |
|
 |
| SYS-5025M-i |
- SuperServer 5025M-i (Beige)
|
| SYS-5025M-iB |
- SuperServer 5025M-iB (Black)
|
| |
|
|
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 (Prescott) processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
- 1MB L2 Cache
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
|
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC / non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533/400MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel E7230 (Mukilteo) chipset
- ICH7R + PXH-V + Intel® 82573V
|
| SATA |
- Intel® ICH7R SATA controller built-in
- RAID 0, 1, 5, 10
|
| IPMI |
- 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: LPIPMI)
- RMM (Remote Management Module)
- (Card not included)
- 3rd LAN Optional
|
| Network Controllers |
- Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI Rage XL (8MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 6x USB 2.0 compliant / 1.1 compatible
- 2 rear ports, 4 internal headers
- 2 in front (FUCI), 2 in rear
|
| VGA |
|
| Audio |
- 1x Line In / Line Out / Microphone port
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| Parallel Port |
- 1x ECP / EEP Parallel Port
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- SMBIOS 2.3
- USB Keyboard support
|
|
|
| |
|
|
| Height |
3.5" (89mm) |
| Width |
16.8" (426mm) |
| Depth |
25.6" (650mm) |
| Gross Weight |
49 lbs (22.3kg) |
| Available Colors |
Beige, Black |
| |
|
|
| Buttons |
• Power On/Off button
• System Reset button
|
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
|
| Ports |
N/A |
| |
|
|
| PCI-Express |
|
| PCI - X |
- 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| |
|
|
| Fixed |
2x Fixed IDE drive carriers (each carrier supports up to 3 hard disk drives) |
| Peripheral Bay(s) |
1x 5.25" full-height peripheral bay |
|
|
|
| Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
| CD-ROM |
- TEAC Slim 24x CD-ROM drive
|
| |
|
|
| Fans |
4x 80mm 3400 RPM fans |
| |
|
|
2U 400W AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] |
| AC Voltage |
- 100 - 240V, 47 - 63Hz, 7 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| -5V |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
|
| CPU |
- Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio settings (via BIOS)
|
| FAN |
- Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
