 |  | | SYS-6023P-i | - SuperServer 6023P-i (Beige)
| | SYS-6023P-iB | - SuperServer 6023P-iB (Black)
|  |  | | CPU |  | Dual mPGA604 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 1MB of integrated Advanced Transfer Cache up to 3.20GHz |  | | System Bus |  | 533MHz/400MHz system bus |  |  |  | | Memory Capacity |  | Eight 184-pin DIMM sockets Supports up to 16 GB DDR266/200 memory Dual channel memory bus Memory must be populated in pairs |  | | Memory Type |  | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |  |  |  | | Chipset |  | Intel® E7501 chipset MCH + ICH3-S + P64H2 |  | | IPMI |  | Support for Intelligent Platform Management Interface v.1.5 (Optional) |  | | Network Controllers |  | Dual Intel® 82546EB Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |  | | Graphics |  | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |  |  |  | | 3x full-height, full-length 64bit 133/100MHz PCI-X expansion slots (Riser card required) |  |  |  | | PCI Expansion |  | 1x 64-bit 133/100MHz PCI-X (3.3V) slot |  | | IDE |  | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |  | | USB |  | 2 USB ports |  | | Serial Ports |  | 2 Fast UART 16550 serial ports |  | | Parallel Port |  | 1 ECP/EEP parallel port |  | | Floppy |  | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |  | | Keyboard / Mouse |  | PS/2 keyboard and mouse ports |  |  |  | | BIOS Type |  | 4Mb Flash EEPROM with Phoenix® BIOS |  | | BIOS Features |  | Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection |  | |  |  |  | | Height |  | 3.5" (89mm) |  | | Width |  | 16.8" (426mm) |  | | Depth |  | 25.6" (650mm) |  | | Gross Weight |  | 49 lbs (22.3kg) |  | | Available Colors |  | Beige, Black |  |  |  | | Buttons |  | Power On/Off button System Reset button |  | | LEDs |  | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |  |  |  | | Internal Bay(s) |  | 6 x 3.5" IDE Drive Bays |  | | Peripheral Bay(s) |  | 1x 5.25" full-height peripheral bay |  |  |  | | 2U 400W AC power supply w/ PFC |  | | AC Voltage |  | 100 - 240V, 50/60Hz, 7 Amp |  | | DC Output |  | & 12V + 5V + 3.3V ≤ 385W |  | | +5V |  | 33.0 amp |  | | +5V standby |  | 2.0 amp |  | | -5V |  | 0.8 amp |  | | +12V |  | 25.0amp |  | | -12V |  | 1.0 amp |  | | +3.3V |  | 28.0 amp |  |  |  | | CPU |  | Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) |  | | FAN |  | Total of seven 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control |  | | Temperature |  | Monitoring for CPU, chassis, environment CPU thermal trip support |  | | LED |  | CPU Overheat LED System Overheat LED Suspend-state indicator LED |  | | Other Features |  | Chassis intrusion detection (through LDCM) Chassis intrusion header Chipkill support |  | |