About Us Products Support News Where To Buy
About Us Company Milestones Investor Relations Careers Contact Policies
SuperServer® SuperBlade® Motherboards Chassis Accessories configurator AMD Solutions
Support Downloads Online Support Product Manuals RMA archive
Newsroom Events & Conferences News Press Releases
Asia / Middle East Pan Europe North America Central America South America Other Regions GSA
 
 
SuperServer 6026TT-GIBQRF
Super Micro Computer, Inc.
Contact Us

Search

Reseller Resource Center
  Products   Systems   2U   [ 6026TT-GIBQRF ]




2 Integrated Boards
Super X8DTT-HIBQF+

Key Features
Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s
2. Up to 192GB** DDR3 1333/ 1066/
    800MHz ECC Registered DIMM / 48GB
    Unbuffered DIMM
3. 1 (x16) PCI-E 2.0 for Double-Width GPU
4. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
5. Dual Intel® 82574L Gigabit
    Ethernet Controller
6. 6x Hot-swap SATA Drive Bays
7. 1400W Gold-level High-efficiency
    Redundant Power Supply
8. Mellanox ConnectX QDR Infiniband
    40Gbps Controller w/ QSFP connector

Available Colors: Black    

 Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested HDD   Manuals 

Product SKUs
SYS-6026TT-GIBQRF
  • SuperServer 6026TT-GIBQRF (Black)
 
Motherboard

2x Super X8DTT-HIBQF+
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 95W

       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W

       
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices (per Node)
Infiniband
  • Mellanox ConnectX QDR Infiniband 40Gbps Controller
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
 
Input / Output (per Node)
Serial ATA
  • Six Serial ATA ports
  • 6 SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
Infiniband
  • 1 External QSFP Infiniband Connector
 
System BIOS (per Node)
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 2U Rackmount
Model
 
Dimensions
Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 28.5" (724mm)
Gross Weight 85 lbs (38.6kg)
Available Colors Black
 
Front Panel (per Node)
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
 
Expansion Slots (per Node)
PCI-Express
  • 1 (x16) PCI-E 2.0 for Double-Width GPU
 
Drive Bays (per Node)
Hot-swap
  • 6x 3.5" SATA Hot-swap drive bays
 
Hard drive Backplane
2U Hard drive Backplane
 
System Cooling
Fans
  • 4x Cooling Fans
 
Power Supply
1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
  Gold Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8DTT-HIBQF+
CSE-827HD-R1400B
2
1
Super X8DTT-HIBQF+ Motherboard
2U Black Chassis
Backplane BPN-827ADP-X8-H+ 2 BPN-SASADPûSAS827-X8DTT-H+;no cable req
Backplane BPN-SAS-827HD 1 Sup 6x3.5ö SATA hdd; hot swap
Backplane BPN-ADP-PWR 2 BPN-ADP-PWR
Cable 1 CBL-0333L 4 6+2 pin to 8 pin GPU power extension from MB, 30cm. 18/20AWG
CD CDR-X8 1 For X8 series
Riser Card RSC-R2UT-E16R-O-P 2 RSC-R2UT-E16R-O-P
Heatsink / Retention SNK-P0037P 4 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Power Supply PWS-1K41P-1R 2 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3
Fan 1 FAN-0129L4 4 80x80x38 mm 11K RPM SC217, SC827 Chassis Middle Fan
Mounting Rails MCP-290-00053-0N 1 Rail set, quick/quick, default for 2,3U 17.2\"W
Optional Parts List
  Part Number Qty Description
NVIDIA GPU card support AOC-GPU-NVC2050 +
MCP-310-82712-0B
(each GPU card)
AOC-GPU-NVC2070 +
MCP-310-82712-0B
(each GPU card)
-
-
NVIDIA C2050 TESLA Fermi GPU/active HS (w/ 3GB cache mem.)
Additional mylar air shroud for SC827HD with C2050 GPU
 
NVIDIA C2070 TESLA Fermi GPU/active HS (w/ 6GB cache mem.)
Additional mylar air shroud for SC827HD with C2070 GPU
 

** Please check 'Tested Memory List' for compatibility
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.