About Us Products Support News Where To Buy
About Us Company Milestones Investor Relations Careers Contact Policies
SuperServer® SuperBlade® Motherboards Chassis Accessories configurator AMD Solutions
Support Downloads Online Support Product Manuals RMA archive
Newsroom Events & Conferences News Press Releases
Asia / Middle East Pan Europe North America Central America South America Other Regions GSA
SuperServer 6026TT-HIBQRF
Super Micro Computer, Inc.
Contact Us


Reseller Resource Center
  Products   Systems   2U   [ 6026TT-HIBQRF ]

4 Integrated Boards
Key Features
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s
2. Up to 192GB** DDR3 1333/ 1066/
    800MHz ECC Registered DIMM / 48GB
    Unbuffered DIMM
3. 1 (x16) PCI-E ( Low Profile)
4. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
5. Dual Intel® 82574L Gigabit
    Ethernet Controller
6. 3x Hot-swap SATA Drive Bays
7. 1400W Gold-level High-efficiency
    Redundant Power Supplies
8. Mellanox ConnectX QDR Infiniband
    40Gbps Controller w/ QSFP connector

Available Colors: Black    

 Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested HDD   Manuals 

Product SKUs
  • SuperServer 6026TT-HIBQRF (Black)

4x Super X8DTT-HIBQF+
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 95W

    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W

  • up to 6.4 GT/s
System Memory
Memory Capacity
  • 12x 240-pin DIMM slots
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
  • 1.5 V / 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices (per Node)
  • Mellanox ConnectX QDR Infiniband 40Gbps Controller
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
  • Matrox G200eW
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
Input / Output (per Node)
Serial ATA
  • Six Serial ATA ports
  • 3 SATA hard drives supported
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
  • 1 External QSFP Infiniband Connector
System BIOS (per Node)
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Form Factor
  • 2U Rackmount
Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 28.5" (724mm)
Gross Weight 85 lbs (38.6kg)
Available Colors Black
Front Panel (per Node)
  • Power On/Off button
  • UID button
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
Expansion Slots (per Node)
  • 1 (x16) PCI-E ( Low Profile)
Drive Bays (per Node)
  • 3x 3.5" SATA Hot-swap drive bays
Hard drive Backplane
2U Hard drive Backplane
System Cooling
  • 4x Cooling Fans
Power Supply
1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
  Gold Certified
  [ Test Report ]
PC Health Monitoring
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
Other Features
  • SDDC Support
Operating Environment / Compliance
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8DTT-HIBQF+
Super X8DTT-HIBQF+ Motherboard
2U Black Chassis
Air Shroud MCP-310-82710-0B 4 2U Air Shroud
Backplane BPN-SAS-827B 1 Sup 12x3.5ö SAS/SATA HDD;hot swap
Backplane BPN-ADP-4SATA 4 4 port Adapter card for BPN-SAS-827B
CD CDR-X8 1 For X8 series
Riser Card RSC-R1U-E16R 4 RSC-R1U-E16R
Heatsink / Retention SNK-P0037P 8 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Drive Tray(s) MCP-220-00075-0B 12 Black gen 5.5 hot-swap 3.5" HDD tray (w/ hollowed dummy)
Mounting Rails MCP-290-00053-0N 1 set Rail set, quick/quick, default for 2,3U 17.2"W

** Please check 'Tested Memory List' for compatibility
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.