 |
 |
SYS-4027GR-TRT |
- SuperServer 4027GR-TRT (Black)
|
|
 |
CPU |
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 150W TDP **)
- Dual Socket R (LGA 2011)
|
Cache |
|
System Bus |
|
Note |
† BIOS version 3.0 or above is required |
Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
GPU/Xeon Phi Support |
- K80, up to 150W CPU at 30°C
- K40 (Atlas), up to 150W CPU at 30°C
- K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C
- Xeon Phi, up to 150W CPU at 30°C
|
|
 |
Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC RDIMM
- Up to 192GB DDR3 ECC/non-ECC UDIMM
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
 |
Chipset |
|
AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
|
SCU SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T
, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
- Matrox G200 (Nuvoton WPCM450 BMC)
|
Super I/O |
|
|
 |
AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
USB |
- 10x USB 2.0 ports total
(4x rear + 4x via header + 2x Type A)
|
Serial Port / Header |
- 1x Fast UART 16550 ports: 1 header
|
|
 |
BIOS Type |
- 16MB SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
 |
 |
Form Factor |
- 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
|
Model |
|
|
 |
Height |
|
Width |
|
Depth |
|
Weight |
- Net Weight: 80 lbs (36.2 kg)
- Gross Weight: 135 lbs (61.2 kg)
|
Available Colors |
|
|
 |
Hot-swap |
|
|
 |
PCI-Express |
- 8x PCI-E 3.0 x16 (double-width) slots
- 2x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 2.0 x4 (in x16) slot
|
|
 |
SAS/SATA HDD Backplane
|
|
 |
Fans |
- 8x 92mm RPM Hot-Swappable Cooling Fans
|
Shrouds |
- 1x Air Shroud (MCP-310-84806-0B)
- 1x Air Shroud (MCP-310-84807-0B)
|
|
 |
1600W 1U Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 12.9A Max / 50-60Hz
- 200-240Vac / 9.5A Max / 50-60Hz
|
+12V |
- Max: 82A / Min: 0.1A (100-127Vac)
- Max: 132A / Min: 0.1A (200-240Vac)
|
12V SB |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
 Platinum Level [ Test Report ]
|
|
 |
CPU |
- Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
FAN |
- 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
Temperature |
- Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
|
Other Features |
- Chassis intrusion detection
|
|
 |
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|