 |
 |
SYS-7044H-32R |
- SuperServer 7044H-32R (Beige)
|
SYS-7044H-32RB |
- SuperServer 7044H-32RB (Black)
|
|
 |
CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
System Bus |
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
 |
Memory Capacity |
- Eight 240-pin DIMM slots
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
|
 |
Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
|
SAS |
- Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
|
SATA |
- 6300ESB 2-port SATA Controller
|
SAS ZCR |
- RAID 0, 1, 5, 10, and JBOD support
- Support for Zero-Channel RAID
- Optional Card not included
|
IPMI |
|
Network Controllers |
- Dual Intel® 82541PI Single-Port Gigabit Controller
|
Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
Super I/O |
|
|
 |
IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN |
|
USB |
- 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
Parallel Port |
|
|
 |
BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
|
 |
 |
 |
Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
Model |
|
|
 |
Height |
- Tower: 17.2" (437mm)
Rackmount: 7.0" (178mm)
|
Width |
- Tower: 7.0" (178mm)
Rackmount: 17.2" (437mm)
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
 |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Power Fail LED
- Power Fail LED
|
Ports |
|
|
 |
PCI-Express |
|
PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
PCI |
|
|
 |
Hot-swap |
- 8x 3.5"SAS / SATA Hot-swap Drive Bays
|
Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
|
 |
SAS Hard Drive Backplane |
|
 |
Fans |
- 4x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
Shroud |
- 1x Air Shroud for 1U Chassis
|
|
 |
760W Triple-Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] |
AC Voltage |
- 100 - 240V, 50-60Hz, 14 Amp Max
|
DC Output |
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
 |
CPU |
- Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
|
FAN |
- Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|