 |
 |
| SYS-7044H-T |
- SuperServer 7044H-T (Beige)
|
| SYS-7044H-TB |
- SuperServer 7044H-TB (Black)
|
| |
 |
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
|
| |
 |
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 333MHz memory, or
- Supports up to 32 GB DDR 266MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR 333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
- Memory Sparing / Mirroring
|
| |
 |
| Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + PXH/V +82541GI
|
| SATA |
- Marvell® 88SX6081 8-port SATA Controller
- RAID 0, 1, JBOD support
|
| SATA |
- 6300ESB 2-port SATA Controller
- RAID 0, 1, JBOD support
|
| Zero Channel RAID |
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR1 or AOC-LPZCR2
- [Card not included]
|
| IPMI |
|
| Network Controllers |
- 2x Intel® 82541GI Single Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
 |
| Serial ATA |
- Ten Serial ATA ports
- Up to ten SATA hard drives supported
- 6300ESB - 2 SATA ports
- Marvell 885X6081- 8 SATA ports
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| ZCR |
- Adaptec 2020SA (Card not included)
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
| Parallel Port |
- 1 ECP/EEP parallel port
- 1 parallel port header
|
|
 |
 |
 |
| Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit (CSE-PT26)
|
| Model |
|
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
 |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| |
 |
| PCI-Express |
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
| |
 |
| Hot-swap |
- 8x 3.5"SATA Hot-swap Drive Bays
|
| Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
 |
| Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
| |
 |
| SATA Hard Drive Backplane |
| |
 |
| Fans |
- 4x 5000 RPM Hot-swappable Cooling Fans
- 2x 5000 RPM Hot-swappable Rear Exhaust Fans
|
| |
 |
650W Redundant-Cooling AC power supply with PFC [ 24-pin, (4-pin, 8-pin) = 12V ] |
| AC Voltage |
- 100 - 240V, 47-63Hz, 11 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V & +5V Standby
|
| FAN |
- Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with status tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Support 3-pin fans
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal control for 8x fan connectors
- PC temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
| |
 |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
|
|