 | |
|
| |
| |
|
| | | | Integrated Board | | | | | | Key Features
Hadoop, 4-Node Front I/O
Each node supports:
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & E3-1200 v2
series, 2nd and 3rd Gen Core i3
processors***, Pentium, and Celeron 2. Up to 32GB DDR3 ECC 1333MHz /
1600MHz*** UDIMMs in 4 sockets 3. 1 (x8) PCI-E 3.0*** Low-profile slot 4. I/O ports: 2 GbE LAN, 1 Built-in video,
1 COM port onboard, 2 USB 2.0 ports 5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port 6. 8 Fixed 3.5" SAS/SATA HDD Bays
(connected to AOC w/ Broadcom 2308
SAS2 ports) + 4 Fixed 3.5" SATA
HDD Bays + 2 Fixed 2.5" SATA
HDD Bays 7. 1620W Redundant Power Supplies
Platinum Level (94%)
| | | |
 | |
| | | | |
 | | SYS-F517H6-FT | | | | | | CPU | - Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *
- Socket H2 (LGA 1155)
| | | | | Memory Capacity | - 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated UDIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 GbE controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | | | | SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| | SAS | - 8x SAS2 ports (6Gbps) supported via Broadcom 2308 AOC
| | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 5x USB 2.0 ports
(2 front, 2 via header, 1 type A) | | VGA | | | Serial Port / Header | | | | | |
| | Form Factor | | | Model | | | | |
| | Width | | | Height | | | Depth | | | Package | - 25.6" (W) x 11.8" (H) x 48.0" (D)
| | Weight | - Net Weight: 200 lbs (90.71 kg)
- Gross Weight: 240 lbs (108.86 kg)
| | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
| | | | | PCI-Express | - 1 (x8) PCI-E 3.0 Low-profile slot*** via riser card
| | | |
| | Fixed | - 8x Fixed 3.5" SAS/SATA HDD trays
(connected to AOC w/ 8x Broadcom 2308 SAS2 Ports) - 4x Fixed 3.5" SATA HDD trays
- 2x Fixed 2.5" SATA HDD trays
| | | |
| | Fans | - 8x 11k RPM 8cm heavy duty fans with air shroud and PWM fan speed control
| | | |
| 1620W high-efficiency redundant power supply w/ PMBus | | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
| | DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
| | Certification |   Platinum Certified
[ Test Report ] | | | | | BIOS Type | - 64Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
|  | | |
| | | |
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X9SCFF-F
CSE-F414IS-R1K62BP | 4
1 | Super X9SCFF-F Motherboard
4U Chassis | | Backplane | BPN-ADP-F418L | 4 | BPN;SASADP;SAS827-H8;H8DTT;cable req | | Backplane | BPN-SAS-816T-A3 | 4 | 3-port 1U/Fat Twin Hadoop HDD (model A3) backplane board, support up to 3x 3.5-inch SAS/SATA HDD | | Backplane | BPN-SAS-816T-A4 | 8 | 4-port 1U/Fat Twin Hadoop HDD (model A4) backplane board, support up to 4x 3.5-inch SAS/SATA HDD | | Cable 1 | CBL-0237L-01 | 4 | 30AWG 70CM IPASS to 4 SATA W/70CM SB, S | | Cable 2 | CBL-0476L | 4 | 30AWG, IPASS to 4 SATA, 55/45/35/30CM, W/ 55CM SB | | Cable 3 | CBL-0484L | 20 | 55CM 30AWG SATA S-S CBL | | Cable 4 | CBL-PWEX-0485-01 | 4 | Power Cable, 8P to 2 2x2(50/60CM) and 2 SATA (26+16CM) 18AWG | | Cable 5 | CBL-PWEX-0511-01 | 4 | Power Cable, 8pin to 2x2pin (50cm) and 2 SATA(46/16cm) 18AWG | | Riser Card | RSC-R1UFF-E8R | 8 | RSC-R1UFF-E8R | | Heatsink / Retention | SNK-P0047PS | 4 | 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB | | Mounting Rail | MCP-290-41803-0N | 1 | Fat twin F418 / F424 Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF | | Add-on Card | AOC-S2308L-L8I | 4 | STD Gen-3 PCI-E @ 8Gb/s, 6Gb/s SAS, 8 internal ports, low profile, RAID 0,1,10 | | |
| | |
| | | Part Number | Qty | Description | | HDD Bracket | MCP-240-00131-0N | 1/node | FIXED HDD bracket when customer use UP MB instead of DP MB |
|
| | *** BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600. |
|
| |
