 | |
 | | SYS-5035L-IB | - SuperServer 5035L-IB (Black)
| | | | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Core™2 Duo E4000 Series
- Supports an Intel® Pentium® E2000 Series
- Supports an Intel® Pentium® D 945, 935, 925, 915 and 820, 805
- Supports an Intel® Pentium® 4 600 and 500 Series
- Supports an Intel® Celeron® E1000 Series
- Supports an Intel® Celeron® 400 Series
- Supports an Intel® Celeron® D 300 Series
| | System Bus | - 1066 / 800 / 533 MHz system bus
| | | | | Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
| | Memory Type | - DDR2 667/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | | | Chipset | - Intel 945GC + ICH7R
- Realtek RTL8111C-GR
| | SATA | - Intel ICH7R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | Network Controllers | - 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| | Graphics | | | Super I/O | | | Clock Generator | | | | | | PCI-Express | - 1 (x16) PCI-Express Slot
- 1 (x4) PCI-Express (in x8 slot)
| | PCI | - 2x 32-bit 33MHz PCI (5V) slots
| | | | | Serial ATA | - Four Serial ATA ports ( 3Gbps )
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | LAN | | | USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear + 2 Type A connector + 2 headers (4 ports)
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | | | | BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
| | | | | |
| | Height | | | Width | | | Depth | | | Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
| | Ports | - 2x Front side USB ports (USB 2.0 ready)
| | | |
| | Internal | - 4x 3.5" tool-less HDD trays
| | External | - 2x 5.25" external drive bays
- 1x 3.5" external drive bay (OEM option)
| | | | |
| | Fans | - 1x 9cm (rear) PWM fan w/ tool-less design
- 1x 8cm (front) cooling fan (optional)
| | | |
| | 300W AC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50-60Hz, 5 Amp
| | DC Output | - 5V + 12V + 3.3V - 12V < 290W
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | Certification | 
Bronze Certified
[ Test Report ] | | | | | CPU | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V/+5V Standby, VBAT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| | FAN | - Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
| | Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
| |
