 | |
 | | SYS-7033A-T | - SuperServer 7033A-T (Beige)
| | SYS-7033A-TB | - SuperServer 7033A-TB (Black)
| | | | CPU | | • Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 512KB L2 (or 1MB L3) integrated Advanced Transfer Cache up to 3.06GHz |  | | System Bus | | 533MHz/400MHz system bus | | | | | Memory Capacity | | • Four 184-pin DIMM sockets
• Supports up to 8 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR266/200 Registered ECC or Unbuffered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | | | | Chipset | | • Intel® E7505 chipset
• MCH + ICH4 + P64H2 | | | Serial ATA | | • Dual Silicon 3112A controllers
• Four Serial ATA ports
• RAID 0, 1 Supported
• RAID 0, 1, 5 Supported WITH ZCR Card (ZCRINT) | | | Network Controllers | | • Dual Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | | | AGP | | 8x/4x AGP Pro | | | PCI Expansion | | • 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot
• 1x 64-bit 100/66MHz PCI-X (3.3V) slots
• 2x 32-bit 33MHz PCI-X (5V) slots | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | USB | | Up to 6 USB 2.0 ports | | | Serial Ports | | 2 Fast UART 16550 serial ports | | | Parallel Port | | 1 ECP/EEP parallel port | | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | BIOS Type | | 4Mb Flash EEPROM with Phoenix® BIOS | | | BIOS Features | | • Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• RTC (Real Time Clock) Wakeup
• BIOS rescue hot keys
• Hardware BIOS virus protection | | | | | | | Height | | 7" (178mm) | | | Width | | 16.8" (427mm) | | | Depth | | 20.9" (531mm) | | | Weight | | 39 lbs (17.7kg) | | | Available Colors | | Beige, Black | | | | | Buttons | | • Power On/Off button
• System Reset button | | | LEDs | | • Power LED
• Hard drive activity LED
• Network activity LED
• System Overheat LED | | | Ports | | 2x Front side USB ports (2.0 ready) | | | | | Hot-swap | | 4x 3.5"SATA hot-swap drive bays | | | Peripheral Bay | | • 2x 5.25" full-height peripheral bay
• 1x 3.5" full-height peripheral bay | | | | | Fans | | • 1x 12cm exhaust thermal fan
• 1x 9cm mounted thermal cooling fan
• 2x 8cm fans (450W power supply configuration) | | | | | 450W Low-noise AC Power Supply (w/ PFC) width Redundant Cooling Feature | | | AC Voltage | | • 100 - 240V, 50/60Hz, 10 Amp | | | DC Output | | • 5V + 3.3V ≤ 160W
• 12V + 5V + 3.3V ≤ 430W | | | +5V | | 26 amp | | | +5V standby | | 2 amp | | | -5V | | 0.5 amp | | | +12V | | 30amp | | | -12V | | 1 amp | | | +3.3V | | 30 amp | | | | | CPU | | • Monitors for CPU Cores, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of six 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection (through LDCM)
• Chassis intrusion header | | |
